Abstract:Titanium dioxide is the most common titanium-containing product on the world market, with increasing demand. The global consumption of TiO 2 is 7–7.5 million tons annually. Titanium dioxide is mainly obtained from ilmenite and rutile concentrates. China, USA, Germany, UK, Mexico, and Saudi Arabia are the largest TiO 2 producers. Alongside with the natural sources of titanium, there are man-made sources. These sources include titanium-containing slag obtained as a result of pyrometallurgical processing of ores and concentrates containing titanium dioxide. These slags, in addition to titanium dioxide, contain silicon in the form of dioxide, silicates or aluminosilicates, whose chemical processing is difficult due to a high melting point thereof (higher than 2000°C) and to their chemical stability in mineral acids (sulfuric, nitric, hydrochloric ones). Processing of such raw materials is carried out by classical chlorine-based and sulfuric-acid-based methods. The fluorides in industry are used in the production of aluminum, zirconium, uranium, beryllium, niobium, etc., which indicates the possibility of using fluoride methods for titanium slag processing. The paper is devoted to the consideration of a method for producing titanium dioxide based on the use of ammonium hydrodifluoride NH 4 HF 2 that exhibits a high reactivity with respect to a number of chemically resistant oxides (the oxides of silicon, titanium, aluminum, etc.). The fluoroammonium method for processing titanium slag using NH 4 HF 2 involves slag decomposition in NH 4 HF 2 melt followed by the sublimation of silicon admixture. The purification from iron, aluminum and other impurities is performed using a solution of NH 4 HF 2 . The further precipitation of titanium followed by the precipitate treatment with the use of AlCl 3 and ZnCl 2 solutions with the subsequent calcination makes it possible to obtain a rutile modification of titanium dioxide.

A novel preparation of titanium dioxide from titanium slag

A novel process for preparation of titanium dioxide from Ti-bearing electric furnace slag: NH4HF2-HF leaching and hydrolyzing process

Novel Process for Titanium Dioxide Production from Titanium Slag: NaOH-KOH Binary Molten Salt Roasting and Water Leaching

Preparation of rutile titanium dioxide pigment from low-grade titanium slag pretreated by the NaOH molten salt method

Study on Preparation of Metatitanic Acid by Hydrolysis in the Process of Producing Titanium Dioxide by Decomposition of Titanium Slag with Alkali Molten Salt

Anti-caking in the production of titanium dioxide using low-grade titanium slag via the NaOH molten salt method

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Microwave-assisted preparation of nanocluster rutile TiO2 from titanium slag by NaOH-KOH mixture activation

Recovery of Titanium Compounds from Ti-enriched Product of Alkali Melting Ti-bearing Blast Furnace Slag by Dilute Sulfuric Acid Leaching

Recovery of titania from high titanium slag by roasting method using concentrated sulfuric acid

Extraction of vanadium and enrichment of titanium from modified Ti-bearing blast furnace slag

Performance of Sulfuric Acid Leaching of Titanium from Titanium-Bearing Electric Furnace Slag

Fluoroammonium Method for Titanium Slag Processing

Technological Study of Titanium Slag Production from Titanium-Bearing Blast Furnace Slag

Room‐Temperature Hydrolysis of Potassium Titanyl Oxalate and Water‐Assisted Crystallization for TiO2 with High Photocatalytic Activity

Mechanism and kinetics study of sulfuric acid leaching of titanium from titanium-bearing electric furnace slag

High-Titanium Slag Preparation Process by Carbothermic Reduction of Ilmenite and Wet-Magnetic Separation

The Effect of Calcination Temperature on the Structure and Activity of TiO2/SiO2 Composite Catalysts Derived from Titanium Sulfate and Fly Ash Acid Sludge