Abstract:High-chromium vanadium–titanium magnetite (HVTM) is an exceptional iron source that has not been mined on a large scale. Since using flux pellets facilitates the reduction in emissions and consumption, a reasonable way to utilize HVTM is by smelting it into flux pellets in a blast furnace. This study elucidates the reducibility and reaction mechanism of HVTM flux pellets. The reducibility, phase composition, and morphology were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy spectroscopy analysis (EDS). The influence of basicity on the reduction reaction mechanism was also analyzed, and 30 pct of conventional iron concentrate was added to optimize the reduction performance of pure HVTM flux pellets. The pellets were treated at 900 °C for 180 minutes in a reducing atmosphere of 30 pct CO+70 pct N 2 . When the basicity (CaO/SiO 2 ) increased from 0.2 to 1.8, the reduction degree of pure HVTM pellets (100 pct HVTM pellets) increased from 60.3 to 85.3 pct. Meanwhile, the reduction degree of HVTM pellets comprising 30 pct conventional iron concentrate (70 pct HVTM pellets) increased from 63.1 to 89.5 pct. The post-reduction compressive strength of 100 pct HVTM pellets decreased from 965.8 to 223.8 N; the post-reduction compressive strength of 70 pct HVTM pellets first decreased from 1454.6 to 223.0 N and then increased to 630.9 N. Moreover, 70 pct HVTM pellets exhibited better reducibility and higher post-reduction compressive strength and could meet the blast furnace standards when the basicity exceeded 1.6 owing to the low TiO 2 content and an appropriate amount of liquid phase. The reaction mechanism of 100 pct HVTM pellets was first controlled by the random nucleation and subsequent growth model as well as the two-dimensional diffusion model. However, after increasing the basicity, the reaction mechanism was only characterized by the random nucleation and subsequent growth model.

Fundamental Study on Utilization of Titanium Resources by RHF Process

An effective and cleaner process to recovery iron, titanium, vanadium, and chromium from Hongge vanadium titanomagnetite with hydrogen-rich gases

Gas-based shaft furnace direct reduction-electric furnace smelting separation process of vanadium titano-magnetite

Method for recovering iron, vanadium and titanium from schreyerite through shaft furnace reduction and electric furnace smelting and separating deep reduction

Research on the process and mechanism of preparing titanium-rich materials from complex ilmenite

Reducibility Optimization and Reaction Mechanism of High-Chromium Vanadium–Titanium Magnetite Flux Pellets

Evaluation of the potential of recovering various valuable elements from a vanadiferous titanomagnetite tailing based on chemical and process mineralogical characterization

Effects of Embedding Direct Reduction Followed by Magnetic Separation on Recovering Titanium and Iron of Beach Titanomagnetite Concentrate

Effect of titanium suboxides on the reaction mechanism of hydrogen-reduced ilmenite

Extraction of vanadium and enrichment of titanium from modified Ti-bearing blast furnace slag

Analysing the HIsmelt process for smelting vanadium–titanium magnetite

Recent Progress in Electric Furnace Titanium Slag Processing and Utilization: A Review

Efficient separation of vanadium, titanium, and iron from vanadium-bearing titanomagnetite by pressurized pyrolysis of ammonium chloride-acid leaching-solvent extraction process

Smelting Reduction Characteristics and Mechanism of Vanadium–Titanium Magnetite Carbon-Bearing Pellet

Enrichment and reconfiguration of titanium-bearing phase in vortex smelting reduction process of vanadium–titanium magnetite

Reduction behaviors of vanadium‐titanium magnetite with H2 via a fluidized bed

High-Efficiency Smelting Separation of Vanadium–Titanium Magnetite by Electrothermal Smelting: Parameter Optimization and Element Enrichment Mechanism

Titanium Extraction from Titania-Bearing Blast Furnace Slag: A Review

Highly efficient separation of titanium minerals from a modified bauxite residue through direct reduction: A comparison study

Investigation of the Hydrogen-Rich Reduction of Panzhihua Ilmenite Concentrate Pellets

High-Titanium Slag Preparation Process by Carbothermic Reduction of Ilmenite and Wet-Magnetic Separation