High-Efficiency Smelting Separation of Vanadium–Titanium Magnetite by Electrothermal Smelting: Parameter Optimization and Element Enrichment Mechanism
Quan Shi,Jue Tang,Mansheng Chu
DOI: https://doi.org/10.1007/s40831-023-00708-y
2023-07-17
Journal of Sustainable Metallurgy
Abstract:Efficient utilization of vanadium–titanium magnetite can be achieved by high-temperature pyrometallurgical smelting separation of the material. The fusibility of vanadium–titanium magnetite during reduction and smelting reflects the difficulty of smelting separation. In this study, the direct reduction of iron obtained from the carbothermal reduction of vanadium–titanium magnetite was used as the raw material for smelting separation, and the effect of process parameters on the smelting separation effect was investigated. The study shows that under the condition of low basicity, the smelting temperature of 1600 °C, basicity of 0.6, carbon ratio of 1.4, and smelting time of 100 min, the recovery rate and mass fraction of Fe, V, and Cr in molten iron are 97.08%, 75.57%, 98.64%, and 96.75%, 1.28%, and 0.35%, respectively, and the recovery rate of TiO2 in slag is 99.76%. Under the condition of high basicity, the smelting temperature of 1600 °C, basicity of 1.0, carbon ratio of 1.4, smelting time of 100 min, the recovery and mass fraction of Fe, V, and Cr in molten iron are 99.74%, 92.53%, 99.10%, and 96.40%, 1.52%, and 0.34%, respectively, and the recovery of TiO2 in slag is 99.71%. The results are of practical interest for efficient smelting of vanadium–titanium magnetite.Graphical Abstract
metallurgy & metallurgical engineering,green & sustainable science & technology