Abstract:Present study determines conditions for titanium magnetite concentrate processing with fairly complete titanium conversion to the slag and iron and vanadium separation in the hot metal. It is quite difficult to process titanium magnetite concentrate in the blast furnaces due to low fusibility of charge and direct electrical melting which cause process instability. Present work is devoted to development of concentrate double stage smelting process with little soda additions, including solid-phase recovery at the first stage using specific coke as a reductant, avoiding concentrate oxidation and including its preliminary thermooxidation. Mix charge made of concentrate, soda and specific coke was granulated in water, dried at 130°C, pellets were placed in graphite crucible, and later on it was set up in the centre of the furnace in alundum crucible. Temperature regimen was fixed under following parameters: temperature at the first stage was 1250°C; soaking time was 50 min; temperature at the second stage was 1500 - 1650°C; soaking time was 35 min. It is established that little soda additive (estimated 3-4% Na2O) to the charge of titanium magnetite concentrate recovery smelting behaves as a coagulant during briquetting, as a catalyst in course of solid-phase recovery, as an inhibitor of DRI briquettes secondary oxidation as slag thinner during smelting. In course of titanium magnetite concentrate reduction smelting process, soda interacts to SiO2, AhO3, TiO2 oxides forming sodium silicates and titanates. Double-stage technology of titanium magnetite concentrate reduction smelting was used, both with soda addition, and without oxidation and preliminary iron oxidation of titanium magnetite concentrates till hematite was developed. Optimal process parameters were determined. Following parameters were obtained: hot metal yield was ~⃒55% of concentrate weight, slag yield - 23.3-25.8%, carbon-free slag content, wt.%: Fe=1.0-1.6; TiO2=62.7-61.9. TiO2 yield in the slag was 89.6-94.1%. Hot metal contains, %: 5,51 C; 0.36 Ti; 0.35 Mn; 0.04 Si; 0,23 V. Vanadium yield in iron was 53.0%.

Enrichment and reconfiguration of titanium-bearing phase in vortex smelting reduction process of vanadium–titanium magnetite

Fusion Separation of Vanadium-Titanium Magnetite and Enrichment Test of Ti Element in Slag

Phase transformation and slag evolution of vanadium–titanium magnetite pellets during softening–melting process

High-Efficiency Smelting Separation of Vanadium–Titanium Magnetite by Electrothermal Smelting: Parameter Optimization and Element Enrichment Mechanism

A thermodynamic model for predicting activity of CaO–SiO2–Al2O3–MgO–TiO2–V2O3–FeO slags during electric furnace smelting process

Reduction Roasting of a Titanomagnetite Concentrate with the Formation of a Titanium–Vanadium Slag Suitable for the Subsequent Recovery of Vanadium and Titanium

Performance calculation of slag from vanadium titano-magnetite by full oxygen bath smelting process

Reducibility Optimization and Reaction Mechanism of High-Chromium Vanadium–Titanium Magnetite Flux Pellets

Titanium-Enriched Slag Prepared by Atmospheric Hydrochloric Acid Leaching of Mechanically Activated Vanadium Titanomagnetite Concentrates

Effect of Cr2O3 content on viscosity and phase structure of chromium-containing high-titanium blast furnace slag

Extraction of vanadium and enrichment of titanium from modified Ti-bearing blast furnace slag

Thermodynamic study of direct reduction of high-chromium vanadium–titanium magnetite (HCVTM) based on phase equilibrium calculation model

Effect of TiO2 on the Crushing Strength and Smelting Mechanism of High-Chromium Vanadium-Titanium Magnetite Pellets

Smelting Reduction Characteristics and Mechanism of Vanadium–Titanium Magnetite Carbon-Bearing Pellet

Softening–Melting Properties and Slag Evolution of Vanadium Titano-Magnetite Sinter in Hydrogen-Rich Gases

Titanium Impurity Control in V-Bearing Pig Iron Prepared via the Sodium Smelting of Vanadium–Titanium Magnetite

High-Efficiency Extraction of Fe, V, and Ti from Vanadium Titano-Magnetite Concentrate Based on Activated Reduction

Reduction behaviors of vanadium‐titanium magnetite with H2 via a fluidized bed

Study on the High-temperature Properties of High-titania Slags produced with Cr-bearing Vanadia-titania Magnetite Smelting in Blast Furnace

A novel method of enhancing valuable element recovery for ultra-high-titanium magnetite

Complex Processing of a Titanium Magnetite Concentrate with Receiving the Products Containing Iron, The Titan and Vanadium