Abstract:The conversion of solid waste into secondary resources has become a prerequisite for the sustainable development of the industry. This study focused on the development of the detoxification process for spent carbon cathode (SCC) without environmental pollution risks and the exploration of the recycling direction of recovered carbonaceous materials. First, the mechanism of thermodynamic conversion and decomposition of toxic substances was explored. Parameters of NaOH–Na2CO3 binary molten salt roasting were optimized through an orthogonal design and a single-factor experiment, and gas release behavior during detoxification treatment was investigated. Results showed that most of the fluoride and cyanide were dissociated and decomposed, and the leaching concentration of fluoride and cyanide was as low as 7.58 and 0.12 mg/L after detoxification treatment, respectively. Then, a multistage recovery process of fluorine from fluorine-containing leachate was designed, and the comprehensive utilization of exhaust gas and the recycling of the reaction reagent were realized simultaneously. The possibility of recovering graphitized carbon blending to prepare carbon anodes was discussed in detail, and the catalytic mechanism of main impurity elements on the O2/CO2 reactivity of carbon anodes was investigated via density-functional-based tight binding (DFTB). The results showed that the Boudouard reaction and carbon–O2 reaction were affected because of the presence of Ca or Na, and the recovered graphitized carbon with a low blending ratio was more suitable for the preparation of carbon anodes. Finally, an economic benefit analysis was conducted to evaluate the industrial application potential of the proposed detoxification treatment. Compared with landfills, the proposed process reduced the disposal cost while eliminating environmental pollution risks and realized the on-site recovery and reuse of valuable components, showing considerable environmental and economic benefits.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06067?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06067</a>.Formula for preparing carbon anode; scheme of the single-factor experiment; economic benefit analysis; and particle size distribution of the mixture with different NaOH-to-Na2CO3 mass ratios (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06067/suppl_file/sc0c06067_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Reducing Carbon Contamination by Controlling CO32− Formation During Electrochemical Reduction of TiO2

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Effective Deoxidation Process of Titanium Scrap Using MgCl2 Molten Salt Electrolytic

Direct oxygen removal technique for recycling titanium using molten MgCl 2 salt

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Self-Cleaning CO 2 Reduction Systems: Unsteady Electrochemical Forcing Enables Stability

Molten Salt Synthesis of Ti3C2/Cu Cocatalyst for Enhanced TiO2 Photocatalytic CO2 Reduction

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Recycling alloy scrap and CO2 by paired molten salt electrolysis

Direct electrochemical reduction of low titanium chlorides into titanium aluminide alloy powders from molten eutectic KCl–LiCl–MgCl2

Sustainable recycling of titanium scraps and purity titanium production via molten salt electrolysis

Research on the electrocatalytic reduction of CO2 by microorganisms with a nano-titanium carburizing electrode

Investigation of the Calciothermic Reduction of TiO 2 for the Green Production of Ti and TiH 2 Powders

Carbon coating to suppress the reduction decomposition of electrolyte on the Li 4Ti 5O 12 electrode

Efficient molten salt CO2 capture and selective electrochemical transformation processes toward carbon neutrality: advances, challenges, and prospects

Separation and recycling of chloride salts from electrolytic titanium powders by vacuum distillation

Synthesis of micro-FeTi powders by direct electrochemical reduction of ilmenite in CaCl2-NaCl molten salt

Detoxification and Recovery of Spent Carbon Cathodes via NaOH–Na 2 CO 3 Binary Molten Salt Roasting–Water Leaching: Toward a Circular Economy for Hazardous Solid Waste from Aluminum Electrolysis

Low Temperature Electrodeposition of Titanium in Fluoride-Added LiCl–KCl–CsCl Molten Salt