Self-Cleaning CO 2 Reduction Systems: Unsteady Electrochemical Forcing Enables Stability

Yi Xu,Jonathan P. Edwards,Shijie Liu,Rui Kai Miao,Jianan Erick Huang,Christine M. Gabardo,Colin P. O’Brien,Jun Li,Edward H. Sargent,David Sinton

DOI: https://doi.org/10.1021/acsenergylett.0c02401

IF: 22

2021-02-02

ACS Energy Letters

Abstract:The electrochemical conversion of CO2 produces valuable chemicals and fuels. However, operating at high reaction rates produces locally alkaline conditions that convert reactant CO2 into cell-damaging carbonate salts. These salts precipitate in the porous cathode structure, block CO2 transport, reduce reaction efficiency, and render CO2 electrolysis inherently unstable. We propose a self-cleaning CO2 reduction strategy with short, periodic reductions in applied voltage, which avoids saturation and prevents carbonate salt formation. We demonstrate this approach in a membrane electrode assembly (MEA) with silver and copper catalysts, on carbon and polytetrafluoroethylene (PTFE)-based gas diffusion electrodes, respectively. When operated continuously, the C2 selectivity of the copper–PTFE system started to decline rapidly after only ∼10 h. With the self-cleaning strategy, the same electrode operated for 157 h (236 h total duration), maintaining 80% C2 product selectivity and 138 mA cm–2 of C2 partial current density, at a cost of <1% additional energy input.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry

What problem does this paper attempt to address?

This paper attempts to solve the problem of carbonate precipitation that damages the battery due to the local alkaline conditions generated by the high reaction rate in the carbon dioxide (CO₂) electrochemical reduction system. Specifically:

1. **Problem description**:
- When CO₂ electrochemical reduction is carried out at a high current density, a large number of hydroxide ions (OH⁻) will be generated, which will increase the local pH value.
- The dissolved CO₂ reacts with these hydroxide ions to generate bicarbonate ions (HCO₃⁻), and finally forms carbonate ions (CO₃²⁻).
- These carbonate ions combine with potassium ions (K⁺) in the electrolyte to form insoluble potassium carbonate (K₂CO₃) precipitation.
- Carbonate precipitation will accumulate in the porous cathode structure, hindering the transport of CO₂, reducing the reaction efficiency, and making CO₂ electrolysis unstable.

2. **Limitations of existing solutions**:
- Traditional cleaning methods such as rinsing the electrodes with water can relieve the problem to a certain extent, but the effect is limited, and it is difficult to maintain a stable current density.
- Salt precipitation occurs deep in the microporous layer of the gas - diffusion electrode, and it is difficult to remove once formed.

3. **Proposed new strategy**:
- The paper proposes a self - cleaning CO₂ reduction strategy to avoid saturation and prevent carbonate formation by periodically reducing the applied voltage.
- The specific method is to alternate between the operating voltage and the regeneration voltage cyclically, for example, 30 seconds of regeneration voltage follows every 60 seconds of operating voltage.
- The regeneration voltage can significantly reduce the carbonate concentration at the cathode while maintaining sufficient negative polarization to migrate carbonate ions to the anode.

4. **Experimental verification**:
- Experiments were carried out on carbon paper and polytetrafluoroethylene (PTFE) - based gas - diffusion electrodes using silver and copper catalysts respectively.
- The results show that using the self - cleaning strategy can keep the electrode at 80% C₂ product selectivity and a partial current density of 138 mA cm⁻² within 157 hours, while the continuously operating electrode can only be maintained for about 10 hours.

In summary, this paper aims to solve the system instability problem caused by carbonate precipitation in the CO₂ electrochemical reduction process through an innovative voltage control strategy, so as to achieve longer - term stable operation.