Abstract:The electrolysis of CO2 into value-added products holds great potential for closing the carbon cycle. A membrane electrode assembly (MEA) that uses solid polymer electrolytes is a critical technology for enhancing the energy efficiency for the CO2 reduction reaction (CO2RR) because a thin electrolyte layer can effectively reduce the ohmic resistance. The stable operation of the CO2RR in MEA-based cells with an anion-exchange membrane (AEM), however, is hindered by the accumulation of bicarbonate salts, which are derived from alkali-metal cations in anolytes, on the cathode side. Therefore, for stable operation of CO2 electrolysis using an MEA-based cell, the amount of alkali-metal cations needs to be reduced. However, the minimal amount of alkali-metal cations required to operate the reaction system has not been elucidated. Quantitative analysis of the amount of alkali-metal cations transported from the anode to the cathode is essential to obtain the insight into the necessary amount for the operation. In this study, we conducted a quantitative evaluation of the correlation between the production of high-value C2+ compounds, such as ethylene and ethanol, and the transported alkali-metal cations. As a result, although the presence of transported alkali-metal cations on the cathode surface significantly contributes to the generation of C2+ compounds, the rate of K+ ion transport did not match the selectivity of C2+. This result suggests a continuous supply of high amount of K+ to the cathode surface is not required for C2+ formation. On the basis of these findings, we achieved a faradaic efficiency (FE) and a partial current density for C2+ of 77% and 230 mA cm−2, respectively, even after switching the anode solution from 0.1 M KHCO3 to a dilute K+ solution (<7 mM) in an MEA-based cell using AEM and Cu nanoparticles as the cathode catalyst. These values of FE and partial current density were almost identical to those when 0.1 M KHCO3 was continuously supplied as the anode solution. Based on this insight, we successfully improved the durability of the system against salt precipitation. The FE for ethylene remained constant for as long as 60 h at 150 mA cm−2 when continuously flowing 0.1 M KHCO3 as anolyte. However, the FE suddenly decreased after 60 h due to the cessation of CO2 gas flow, caused by salt precipitation in the cathode flow channel. On the contrary, by intermittently supplying 0.1 M KHCO3, we confirmed that the amount of visible K+ salt in the cathode flow field remained negligible even after more than 90 hours of stable operation.

Anchoring Cs+ Ions on Carbon Vacancies for Selective CO2 Electroreduction to CO at High Current Densities in Membrane Electrode Assembly Electrolyzers

Quantitative Analysis and Manipulation of Alkali Metal Cations at the Cathode Surface in Membrane Electrode Assembly Electrolyzers for CO2 Reduction Reactions

Field-enhanced CO Electroreduction in Membrane Electrolyzers at a Dehydrated Interface

Immobilized Tetraalkylammonium Cations Enable Metal‐free CO2 Electroreduction in Acid and Pure Water

Suppression of Salt Precipitation in Membrane Electrode Assembly Electrolyzers for CO2 reduction reactions by Intermittent Supply of Alkali Metal Cations

Enhancing Local CO 2 Concentration via Covalent Interaction for the Conversion of Carbonate to CO

Alkali metal cations enhance CO2 reduction by a Co molecular complex in a bipolar membrane electrolyzer

Anionic Ionomer: Released Surface-Immobilized Cations and an Established Hydrophobic Microenvironment for Efficient and Durable CO2-to-Ethylene Electrosynthesis at High Current over One Month

Towards membrane-electrode assembly systems for CO2 reduction: a modeling study

Continuous Carbon Dioxide Electroreduction to Concentrated Multi-carbon Products Using a Membrane Electrode Assembly

Self-Cleaning CO 2 Reduction Systems: Unsteady Electrochemical Forcing Enables Stability

Performance Enhancement of a Membrane Electrochemical Cell for CO 2 Capture

Effect of electrolyte cation-mediated mechanism on electrocatalytic carbon dioxide reduction

CO2-to-methanol electroconversion on a molecular cobalt catalyst facilitated by acidic cations

Confinement of an Alkaline Environment for Electrocatalytic CO2 Reduction in Acidic Electrolytes.

Surface-immobilized cross-linked cationic polyelectrolyte enables CO2 reduction with metal cation-free acidic electrolyte

A Solid-State Electrolyte Facilitates Acidic CO2 Electrolysis without Alkali Metal Cations by Regulating Proton Transport

Anionic Ionomer: Released Surface-Immobilized Cations and an Established Hydrophobic Microenvironment for Efficient and Durable CO 2 -to-Ethylene Electrosynthesis at High Current over One Month

Anionic Surfactant-Tailored Interfacial Microenvironment for Boosting Electrochemical CO2 Reduction

Direct Membrane Deposition for CO 2 Electrolysis

High-Rate and Efficient Ethylene Electrosynthesis Using a Catalyst/Promoter/Transport Layer