Abstract:The conversion of solid waste into secondary resources has become a prerequisite for the sustainable development of the industry. This study focused on the development of the detoxification process for spent carbon cathode (SCC) without environmental pollution risks and the exploration of the recycling direction of recovered carbonaceous materials. First, the mechanism of thermodynamic conversion and decomposition of toxic substances was explored. Parameters of NaOH–Na2CO3 binary molten salt roasting were optimized through an orthogonal design and a single-factor experiment, and gas release behavior during detoxification treatment was investigated. Results showed that most of the fluoride and cyanide were dissociated and decomposed, and the leaching concentration of fluoride and cyanide was as low as 7.58 and 0.12 mg/L after detoxification treatment, respectively. Then, a multistage recovery process of fluorine from fluorine-containing leachate was designed, and the comprehensive utilization of exhaust gas and the recycling of the reaction reagent were realized simultaneously. The possibility of recovering graphitized carbon blending to prepare carbon anodes was discussed in detail, and the catalytic mechanism of main impurity elements on the O2/CO2 reactivity of carbon anodes was investigated via density-functional-based tight binding (DFTB). The results showed that the Boudouard reaction and carbon–O2 reaction were affected because of the presence of Ca or Na, and the recovered graphitized carbon with a low blending ratio was more suitable for the preparation of carbon anodes. Finally, an economic benefit analysis was conducted to evaluate the industrial application potential of the proposed detoxification treatment. Compared with landfills, the proposed process reduced the disposal cost while eliminating environmental pollution risks and realized the on-site recovery and reuse of valuable components, showing considerable environmental and economic benefits.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06067?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06067</a>.Formula for preparing carbon anode; scheme of the single-factor experiment; economic benefit analysis; and particle size distribution of the mixture with different NaOH-to-Na2CO3 mass ratios (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06067/suppl_file/sc0c06067_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Detoxification and Recovery of Spent Carbon Cathodes via NaOH–Na 2 CO 3 Binary Molten Salt Roasting–Water Leaching: Toward a Circular Economy for Hazardous Solid Waste from Aluminum Electrolysis

Purification of spent cathode carbon from aluminum electrolysis cells by alkali fusion-acid leaching process

Research on synergistic disposal and high-value utilization of secondary aluminum dross and spent carbon anode

Advances in the Safe Disposal and Comprehensive Utilization of Spent Carbon Anode From Aluminum Electrolysis: Prospects for Extraction and Application of Carbon Resources From Hazardous Waste

Methodological Review of Methods and Technology for Utilization of Spent Carbon Cathode in Aluminum Electrolysis

The recycling of carbon-rich solid wastes from aluminum electrolytic cells: a review

An efficient and clean treatment of spent carbon cathode via fluorination roasting: Deep separation strategy for insoluble aluminosilicates

Recovery of carbon from spent carbon cathode by alkaline and acid leaching and thermal treatment and exploration of its application in lithium-ion batteries

Harmless recovery and utilization of electrolytic aluminum spent cathode carbon block: A comprehensive review

Design and Optimization of the Direct Recycling of Spent Li-Ion Battery Cathode Materials

Cleaner separation and recovery of valuable metals from spent ternary cathode via carbon dioxide synergetic thermite reduction strategy

Recycling alloy scrap and CO2 by paired molten salt electrolysis

Direct Recovery and Efficient Reutilization of Degraded Ternary Cathode Materials from Spent Lithium-Ion Batteries via a Homogeneous Thermochemical Process

A comprehensive approach for the recycling of anode materials from spent lithium-ion batteries: Separation, lithium recovery, and graphite reutilization as environmental catalyst

Optimization of response surface methodology (RSM) for defluorination of spent carbon cathode (SCC) in fire-roasting aluminum electrolysis

Strengthening Valuable Metal Recovery from Spent Lithium-Ion Batteries by Environmentally Friendly Reductive Thermal Treatment and Electrochemical Leaching

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

Separation and recovery of valuable elements from acid leachate of spent carbon cathode by fractional precipitation method

Selective preparation of lithium carbonate from overhaul slag by high temperature sulfuric acid roasting - Water leaching

Low-Temperature Molten-Salt-Assisted Recovery of Valuable Metals from Spent Lithium-Ion Batteries

Recycling of spent lithium nickel cobalt manganese oxides via a low-temperature ammonium sulfation roasting approach