Abstract:The corrosion and electrochemical behaviour of carefully prepared ultra-lightweight magnesium-lithium (Mg-Li) alloys were investigated and compared. The alloy compositions studied were selected to provide the ability to compare unique microstructures and crystal structures, which arise from specific alloying additions of Li. Mg-4% Li is hexagonal closed-packed (HCP) alloy with Li in solid solution of Mg (alpha-Mg); Mg-14% Li is a fully solid solution BCC (beta-Li) alloy, whilst Mg-7.5% Li is a duplex (alpha-Mg thorn beta-Li) alloy. Testing in 0.1 M NaCl revealed that the corrosion performance and electrochemical response of the Mg-Li system evolved with the composition and crystallographic structure. For Mg-4% Li alloy, filiform-like corrosion morphology can be observed on the corroded surface, whilst a mixture of filiform-like corrosion to the alpha-Mg and localised dissolution of b-Li existed on the corroded surface of Mg-7.5% Li alloy. In the case of the BCC structured Mg-14% Li alloy, minor pitting was observed, concomitant with a generally low corrosion rate (particularly low corrosion rate for typical Mg alloys) and an increasing corrosion resistance with exposure time were also revealed. A combination of exposure testing inclusive of hydrogen collection and mass loss, in addition to potentiodynamic polarisation and impedance spectroscopy elucidated and quantified the corrosion performance of three differently structured Mg-Li alloys. It revealed that in spite of being composed of reactive elements of Mg and Li, the formation of beta-Li phases with BCC structure could facilitate the formation of a highly protective surface film which results in a predictable and consistently low corrosion rate of the Mg-14% Li alloy. (C) 2017 Elsevier Ltd. All rights reserved.

Microstructure and corrosion behavior of as-homogenized and as-extruded Mg−xLi−3Al−2Zn−0.5Y alloys (x=4, 8, 12)

Microstructure and Corrosion Behavior of As-Homogenized Mg-xLi-3Al-2Zn-0.2Zr Alloys (x=5, 8, 11 Wt%)

Microstructure and Corrosion Behavior of As-Extruded Mg-6.5Li-xY-yZn Alloys

Effects of Alloying Elements on the Microstructure and Corrosion Behavior of Mg–Li–Al–Y Alloys

Microstructure and Corrosion Properties of Duplex-Structured Extruded Mg-6Li-4Zn-xMn Alloys

Microstructure And Mechanical Properties Of Mg-8li-4al-0.3y Alloys

Microstructures and Corrosion Resistance of Three Typical Superlight Mg–Li Alloys

Microstructure, Texture, and Mechanical Properties of As-Extruded Mg-xLi-3Al-2Zn-0.2Zr Alloys (x = 5, 7, 8, 9, 11 Wt%)

Microstructure, Mechanical Properties, and Corrosion Behavior of Al-4.0Cu-1.1Li-0.5Mg-xAg Alloys

Composition and Microstructure Dependent Corrosion Behaviour of Mg-Li Alloys

Microstructures and Mechanical Properties of Mg-2Y-xZn (x=1, 2, 3 At%) Alloys

Microstructure and Corrosion Behavior of the As-cast Mg-xAl (x=9%, 12%, 15%) Alloys

Influence of Mg Content on the Corrosion Behavior and Precipitation of Aged Al-Cu-Li-xMg Alloys

Effects of Li on Microstructures and Corrosion Behaviors of Mg-Li-Al Alloys

Effect of Al on the Microstructure, Corrosion Behavior and Mechanical Properties of Mg-4Li

Microstructures, Mechanical Properties and Corrosion Behaviors of Mg–Y–Zn–Zr Alloys with Specific Y/Zn Mole Ratios

Effect of Al on Microstructure and Mechanical Properties of Mg-10Li-3Zn-1Y Alloys

Microstructure and mechanical properties of as-cast ultralight and high strength Mg-10Li-3Al-3Zn-xY alloy with multi-precipitates

Microstructure and corrosion resistance of ultrahigh pressure Mg-8Li based alloys

Influence of Yttrium Addition on the Corrosion Behaviour of As-Cast Mg–8Li–3Al–2Zn Alloy

Microstructure and mechanical properties of as-cast Mg−8Li−xZn−yGd (x=1, 2, 3, 4; y=1, 2) alloys