Abstract:Carbon nanotube field-effect transistors (CNT FETs) have been demonstrated to exhibit high performance only through low-temperature fabrication process and require a low thermal budget to construct monolithic three-dimensional (M3D) integrated circuits (ICs), which have been considered a promising technology to meet the demands of high-bandwidth computing and fully functional integration. However, the lack of high-quality CNT materials at the upper layer and a low-parasitic interlayer dielectric (ILD) makes the reported M3D CNT FETs and ICs unable to provide the predicted high performance. In this work, we demonstrate a multilayer stackable process for M3D integration of high-performance aligned carbon nanotube (A-CNT) transistors and ICs. A low-kappa (similar to 3) interlayer SiO2 layer is prepared from spin-on-glass (SOG) through processes with a highest temperature of 220 C-degrees, presenting low parasitic capacitance between two transistor layers and excellent planarization to offer an ideal surface for the A-CNT and device fabrication process. A high-quality A-CNT film with a carrier mobility of 650 cm(2) V-1 s(-1) is prepared on the ILD layer through a clean transfer process, enabling the upper CNT FETs fabricated with a low-temperature process to exhibit high on-state current (1 mA mu m(-1)) and peak transconductance (0.98 mS mu m(-1)). The bottom A-CNT FETs maintain pristine high performance after undergoing the ILD growth and upper FET fabrication. As a result, 5-stage ring oscillators utilizing the M3D architecture show a gate propagation delay of 17 ps and an active region of approximately 100 mu m(2), representing the fastest and the most compact M3D ICs to date.

Indium Zinc Oxide Nanosheet Transistor with 2 nm Channel Thickness for Monolithic Three-dimensional Integrated Circuit

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Aggressively Scaled Atomic Layer Deposited Amorphous InZnOx Thin Film Transistor Exhibiting Prominent Short Channel Characteristics (SS= 69 mV/dec.; DIBL = 27.8 mV/V) and High Gm(802 μS/μm at VDS = 2V)

P‐1.12: Sub‐200nm Nano‐scale Indium‐Zinc‐Oxide Ultra‐thin Channel Transistors

Heterogeneous Integration of Atomically-Thin Indium Tungsten Oxide Transistors for Low-Power 3D Monolithic Complementary Inverter

High-Performance Atomic-Layer-Deposited Indium Oxide 3-D Transistors and Integrated Circuits for Monolithic 3-D Integration

Amorphous InGaZnO Thin-Film Transistors With Sub-10-nm Channel Thickness and Ultrascaled Channel Length

Indium-Tin-Oxide Transistors with One Nanometer Thick Channel and Ferroelectric Gating

Sub-100 Nm Self-Aligned Top-Gate Amorphous InGaZnO Thin-Film Transistors with Gate Insulator of 4 Nm Atomic-Layer-Deposited AlOx

Self-aligned Indium–gallium–zinc Oxide Thin-Film Transistors with SiNx/SiO2/SiNx/SiO2 Passivation Layers

One-Volt, Solution-Processed InZnO Thin-Film Transistors

Amorphous indium zinc oxide thin film transistors with poly-4-vinylphenol gate dielectric layers

Self-Aligned Indium–Gallium–Zinc Oxide Thin-Film Transistor with Phosphorus-Doped Source/Drain Regions

Low-voltage, Solution-Processed InZnO Thin-Film Transistors with Enhanced Performance Achieved by Bilayer Gate Dielectrics

First Demonstration of Highly Scaled Atomic Layer Deposited Ultrathin InSnZnO Channel Thin Film Transistor Exhibiting Superior Electrical Characteristics

Atomically Thin Indium-Tin-Oxide Transistors Enabled by Atomic Layer Deposition

Heterojunction Channel Engineering in Performance Enhancement of Solution-Processed Oxide Thin-Film Transistors

Method for Fabricating Amorphous Indium-Zinc-Oxide Thin-Film Transistors with Copper Source and Drain Electrodes

Thin-Film Transistors with Neodymium-Incorporated Indium–Zinc-Oxide Semiconductors

High-Mobility Solution-Processed Amorphous Indium Zinc $\hbox{oxide/in}_{2}\hbox{o}_{3}$ Nanocrystal Hybrid Thin-Film Transistor