Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

WN coating of TiN electrode to improve the reliability of phase change memory

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Electrothermal Simulation of Single-Walled Carbon Nanotube (Swcnt)-Based Phase Change Memory for 3-Dics

Electrothermal Investigation on Vertically Aligned Single-Walled Carbon Nanotube Contacted Phase-Change Memory Array for 3-D ICs

TiWOx Interfacial Layer for Current Reduction and Cyclability Enhancement of Phase Change Memory

Localization of Joule Heating in Phase-Change Memory With Incorporated Nanostructures and Nanolayer for Reducing Reset Current

A Systematic Investigation of TiN/CuxO/Cu RRAM with Long Retention and Excellent Thermal Stability

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Phase Change Random Access Memory Featuring Silicide Metal Contact And High-Kappa Interlayer For Operation Power Reduction

Highly electrical resistive SiTiN<i><sub>x</sub></i> heating layers and diffusion barriers for PCRAM

B21-P-09The Crystal Micro-Structure Evolution of In-Situ Annealed Phase Change Material TiSbTe Film

Thermal Stability and Electrical Resistivity of Sitanx Heating Layer for Phase-Change Memories

Programming Current Density Reduction for Elevated-Confined Phase Change Memory with a Self-Aligned Oxidation TiWOx Heater

Engineering Thermal and Electrical Interface Properties of Phase Change Memory with Monolayer MoS2

Low Power Phase Change Memory with Vertical Carbon Nanotube Electrode

Endurance improvement technology with nitrogen implanted in the interface of WSiOx resistance switching device

Impact of titanium modification on the performance improvement and phase change mechanism of ZnSb thin film

Pt Modified Sb2Te3 Alloy Ensuring High−Performance Phase Change Memory

Direct observation of phase-change volume in contact resistance change memory using N-doped Cr2Ge2Te6 phase-change material

Co-doping: An effective strategy for developing stable and high-speed Sb2Te-based phase-change memory

Endurance Enhancement Of Cu-Oxide Based Resistive Switching Memory With Al Top Electrode