Abstract:This study investigates the effect of silicon carbon nitride (SiCN) as an interlayer for ZnO-based resistive random access memory (RRAM). SiCN was deposited using plasma-enhanced chemical vapor deposition (PECVD) with controlled carbon content, achieved by varying the partial pressure of tetramethylsilane (4MS). Our results indicate that increasing the carbon concentration enhances the endurance of RRAM devices but reduces the on/off ratio. Devices with SiCN exhibited lower operating voltages and more uniform resistive switching behavior. Oxygen migration from ZnO to SiCN is examined by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses, promoting the formation of conductive filaments (CFs) and lowering set voltages. Additionally, we examined the impact of top electrode oxidation on RRAM performance. The oxidation of the Ti top electrode was found to reduce endurance and increase low resistive state (LRS) resistance, potentially leading to device failure through the formation of an insulating layer between the electrode and resistive switching material. The oxygen storage capability of SiCN was further confirmed through high-temperature stress tests, demonstrating its potential as an oxygen reservoir. Devices with a 20 nm SiCN interlayer showed significantly improved endurance, with over 500 switching cycles, compared to 62 cycles in those with a 5 nm SiCN layer. However, the thicker SiCN layer resulted in a notably lower on/off ratio due to reduced capacitance. These findings suggest that SiCN interlayers can effectively enhance the performance and endurance of ZnO-based RRAM devices by acting as an oxygen reservoir and mitigating the top electrode oxidation effect.

Endurance improvement technology with nitrogen implanted in the interface of WSiOx resistance switching device

Conduction Mechanism and Improved Endurance in HfO 2 -Based RRAM with Nitridation Treatment

Nitrogen-Oxyanion-Doped HfO2 Resistive Random-Access Memory with Chemically Enhanced Forming

Nitrogen-induced improvement of resistive switching uniformity in a HfO2-based RRAM device

Silicon Introduced Effect On Resistive Switching Characteristics Of Wox Thin Films

Improvement of endurance degradation for oxide based resistive switching memory devices correlated with oxygen vacancy accumulation effect

Oxygen-ion-migration-modulated Bipolar Resistive Switching and Complementary Resistive Switching in Tungsten/indium Tin Oxide/gold Memory Device

Optimizing endurance performance of Ga2O3 random resistive access memories by altering oxygen vacancy content

Material Engineering Technique for Siox-Based Embedded Rram with Cmos Compatible Process

Controlling the Degree of Forming Soft-Breakdown and Producing Superior Endurance Performance by Inserting BN-Based Layers in Resistive Random Access Memory

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Uniform, Fast, and Reliable LixSiOy-Based Resistive Switching Memory

Improvement of Hafnium Oxide Resistive Memory Performance Through Low-Temperature Supercritical Oxidation Treatments

Effect of SiCN thin film interlayer for ZnO-based RRAM

Improved Performance of NbOx Resistive Switching Memory by In-Situ N Doping

Characteristics and Mechanisms of Silicon-Oxide-Based Resistance Random Access Memory

Vacancy Associates-Rich Ultrathin Nanosheets for High Performance and Flexible Nonvolatile Memory Device

Design of a Two-Layer Structure to Significantly Improve the Performance of Zinc Oxide Resistive Memory

Improving the Electrical Performance of Resistive Switching Memory Using Doping Technology

Improvement of Device Reliability by Introducing a BEOL-Compatible TiN Barrier Layer in CBRAM