Abstract:Phase-change memory (PCM) has great potential for numerous attractive applications on the premise of its high-device performances, which still need to be improved by employing a material with good overall phase-change properties. In respect to fast speed and high endurance, the Ti-Sb-Te alloy seems to be a promising candidate. Here, Ti-doped Sb2Te3 (TST) materials with different Ti concentrations have been systematically studied with the goal of finding the most suitable composition for PCM applications. The thermal stability of TST is improved dramatically with increasing Ti content. The small density change of T0.32Sb2Te3 (2.24%), further reduced to 1.37% for T0.56Sb2Te3, would greatly avoid the voids generated at phase-change layer/electrode interface in a PCM device. Meanwhile, the exponentially diminished grain size (from ∼200 nm to ∼12 nm), resulting from doping more and more Ti, enhances the adhesion between phase-change film and substrate. Tests of TST-based PCM cells have demonstrated a fast switching rate of ∼10 ns. Furthermore, because of the lower thermal conductivities of TST materials, compared with Sb2Te3-based PCM cells, T0.32Sb2Te3-based ones exhibit lower required pulse voltages for Reset operation, which largely decreases by ∼50% for T0.43Sb2Te3-based ones. Nevertheless, the operation voltages for T0.56Sb2Te3-based cells dramatically increase, which may be due to the phase separation after doping excessive Ti. Finally, considering the decreased resistance ratio, TixSb2Te3 alloy with x around 0.43 is proved to be a highly promising candidate for fast and long-life PCM applications.

Pt Modified Sb2Te3 Alloy Ensuring High−Performance Phase Change Memory

Ta-doped Ge5Sb95 Phase Change Thin Films for High Speed and Low Power Application

Ti-Sb-Te alloy: a candidate for fast and long-life phase-change memory.

Sb 7 Te 3 /znsb Multilayer Thin Films for High Thermal Stability and Long Data Retention Phase-Change Memory

Advantages of Ta-Doped Sb3Te1 Materials for Phase Change Memory Applications

High Thermal Stability and Fast Speed Phase Change Memory by Optimizing GeSbTe with Scandium Doping

Co-doping: An effective strategy for developing stable and high-speed Sb2Te-based phase-change memory

Excellent performance Ruthenium doped Sb2Te3 alloy for phase change memory

Atomic Scale Insight into the Effects of Aluminum Doped Sb2Te for Phase Change Memory Application

Sb7te3/Ge Multilayer Films for Low Power and High Speed Phase-Change Memory

Simultaneously Introducing Tetrahedral and Pseudo-Octahedron by Single-Element Doping Enables Faster and More Stable Phase Change Memory

Scandium Doped Ge2Sb2Te5 for High-Speed and Low-Power-consumption Phase Change Memory

A Candidate Zr-Doped Sb2te Alloy for Phase Change Memory Application

Graphite Carbon-Doped Sb 2 Te Nanostructures for Phase-Change Memory Applications

The Phase Change Memory Features High-Temperature Characteristic Based on Ge-Sb-Se-Te Alloys

Graphite Carbon-Doped Sb2Te Nanostructures for Phase-Change Memory Applications

Advantage of Ti-Doped Ge2Sb2Te5 Material for Phase Change Memory Applications

W-Sb-Te Phase-Change Material: A Candidate For The Trade-Off Between Programming Speed And Data Retention

Balance between thermal stability and operation speed realized by Ti gradient doping in Sb<sub>2</sub>Te<sub>3</sub> phase-change memory

Properties of Ti–Sb–Te Doped with SbSe Alloy for Application in Nonvolatile Phase Change Memory

Non-volatile Multi-Level Cell Storage Via Sequential Phase Transition in Sb7Te3/GeSb6Te Multilayer Thin Film