Abstract:The development of high-performance integrated circuit chips and the shrinkage of feature sizes according to Moore’s law bring forward continuously the requirements for low dielectric constant (low-k) materials with various excellent properties in the back-end-of-the-line (BEOL) interconnect. Porous SiCOH films prepared by plasma enhanced chemical vapor deposition (PECVD) through a porogen approach are widely applied to industry and extensively studied. Thermal annealing is an important process for fabricating the porous low-k films, which has a great influence on film structure as well as properties. SiCOH films are deposited by PECVD using tetraethoxysilane and limonene as precursors, and annealed at 450 ℃ for 1.5 h under nitrogen atmosphere. The evolutions of film structure and properties during thermal annealing are revealed, and the reaction mechanism for structure change is also proposed. Fourier transform inferred spectroscopy and solid state nuclear magnetic resonance results show that the as-deposited film is an organic-inorganic hybrid film composed of various kinds of Si-O-Si, -CHx, Si-O-CH2CH3, etc. The organic component is removed almost completely during thermal annealing, making a porous film with a Si-O-Si inorganic skeleton. The skeleton is also rearranged at the same time. Deconvolution of the Si-O-Si absorption band of the FTIR spectrum reveals that the cage-like Si-O-Si occupies the major part for both as-deposited and annealed films, while the amount of silicon suboxide Si-O-Si decreases and that of network Si-O-Si increases during thermal annealing, making the film more robust. More C=C and Si-C are formed through chemical reactions between Si-H, -CHx and Si-O-CH2-CH3, and crosslinking is further enhanced. Nitrogen adsorption/desorption isothermal measurement reveals that a large number of micropores with diameter less than 2-3 nm are created during thermal annealing, which is consistent with the removal of organic groups and the existence of cage-like Si-O-Si. As a result, both the refractive index and dielectric constant decrease significantly from 1.476 (λ =630 nm) and 3.45 to 1.365 and 2.60, respectively. Because of the increase of C=C after annealing, extinction coefficient and leakage current density increase. Although there is a shrinkage of 14.7% in film thickness and a reduction of mechanical properties after annealing, the Young’s modulus is still larger than 4 GPa. Considering all kinds of properties, the obtained film appears to be a competitive candidate as inter layer dielectrics in the BEOL interconnect of integrated circuits.

Average power handling capability on SiON thin film coplanar waveguide interconnections for MMICs

The Frequency-Dependent Average Power Handling Capability Of Metal-Insulator Semiconductor (Mis) Microstrip Interconnects

Wide-band characterization of average power handling capabilities of some microstrip interconnects on polyimide and polyimide/GaAs substrates

Frequency-Dependent Maximum Average Power-Handling Capabilities of Single and Edge-Coupled Microstrip Lines on Low-Temperature Co-Fired Ceramic (ltcc) Substrates

Wideband Average Power Handling Capability of Coupled Microstrips on Polyimide and Polyimide∕gaas Substrates

Average Power-Handling Capability Of The Signal Line In Coplanar Waveguides On Polyimide And Gaas Substrates Including The Irregular Line Edge Shape Effects

Finite-Ground Thin-Film Microstrip Interconnects (tfmis) and Their Power Handling Capabilities over Ultra-Wide Frequency Ranges

Power Handling Capability Of Substrate Integrated Waveguide Interconnects And Related Transmission Line Systems

Studies on Average Power Handling Capacity of SIW with Heat Transfer Theory

Micro-characterisation of Si wafers by high-pressure thermopower technique

Tetrahedral Amorphous-Carbon Thin Films for Silicon-on-insulator Application

Effect of Thermal Annealing on the Structure and Properties of Plasma Enhanced Chemical Vapor Deposited Sicoh Film

Analysis of Energy Density and Scanning Speed Impacts on Ni/Sic Ohmic Contacts During Laser Annealing

Wafer-scale Heterogeneous Integration of Monocrystalline \b{eta}-Ga2O3 Thin Films on SiC for Thermal Management by Ion-Cutting Technique

Extended Scalability of HfON/SiON Gate Stack Down to 0.57 nm Equivalent Oxide Thickness with High Carrier Mobility by Post-Deposition Annealing

Synthesis of low-k SiONC thin films by plasma-assisted molecular layer deposition with tetraisocyanatesilane and phloroglucinol

A Highly Efficient Annealing Process with Supercritical N2O at 120 °C for SiO2/4H–SiC Interface

Wet-Oxidation-Assisted Chemical Mechanical Polishing and High-Temperature Thermal Annealing for Low-Loss 4H-SiC Integrated Photonic Devices

Thick film hydrogen silsesquioxane planarization for passive component technology associated with electronic-photonic integrated circuits

Comparative study of electrical characteristics for n-type 4H–SiC planar and trench MOS capacitors annealed in ambient NO

Enhanced Quality of Al2O3/SiC Gate Stack Via Microwave Plasma Annealing