Abstract:Continuously scaling down and decreasing operation voltages of ICs, from the 5 V TTL-compatible voltage to 3.3 V, then 1.2 V, and now 0.8 V for low-power ICs, results in more stringent electrostatic discharge protection design requirements, such as a narrow ESD design window, low operation voltage, and high ESD robustness. Based on traditional diode string and diode-triggered silicon-controlled rectifiers, an enhanced diode-triggered silicon-controlled rectifier is proposed to meet the requirements of low-voltage integrated circuits as bidirectional electrostatic discharge protection. The new device employs an additional PMOS and NMOS in the N-well and P-well, respectively, to offer additional current paths along the surface to significantly enhance its robustness. TCAD simulation shows that the device is triggered by both the diode strings and embedded MOS, making the device turn on faster and the current distribution more uniform during the ON state owing to the additional surface current paths. The proposed new device has excellent dual-directional ESD protection performance with a figure of merit of 4.01 mA/um2, which is about a 71% improvement compared with the conventional diode-triggered silicon-controlled rectifier. It also has higher area efficiency, lower trigger voltage, lower current leakage, and a faster turn-on speed. The proposed enhanced diode-triggered silicon-controlled rectifier is an attractive ESD protection solution for ultra-low-voltage ICs.

All-nMOS Power-Rail ESD Clamp Circuit With Compact Area and Low Leakage

Area-saved and Low-Leakage Design of Power-Rail Clamp Circuit

Area-efficient Transient Power-Rail Electrostatic Discharge Clamp Circuit with Mis-Triggering Immunity in a 65-Nm CMOS Process

A Low Leakage Power-Rail ESD Clamp Circuit with Adjustable Holding Voltage in Nanoscale Process

Power-Rail Esd Clamp Circuit With Parasitic-Bjt And Channel Parallel Shunt Paths To Achieve Enhanced Robustness

Design of a Novel Static-Triggered Power-Rail ESD Clamp Circuit in a 65-Nm CMOS Process

Design and Analysis of an Area-Efficient High Holding Voltage ESD Protection Device

Very Small Snapback Silicon-Controlled Rectifier for Electrostatic Discharge Protection in 28 Nm Processing.

Area-Efficient Power-Rail ESD Clamp Circuit with False-Trigger Immunity in 28nm CMOS Process

Investigation on Bi-directional SCR ESD Protection Devices in a 0.18 μm RF CMOS Process

Feedback Enhanced Area-Efficient ESD Power Clamp Circuit

Power-rail ESD Clamp Circuit with Hybrid-Detection Enhanced Triggering in a 65-Nm, 1.2-V CMOS Process.

Robust and area-efficient nLDMOS-SCR with waffle layout structure for high-voltage ESD protection

New Power Clamp Circuit for Concurrent ESD and Surge Protections

A novel power-clamp assisted complementary MOSFET for robust ESD protection.

New power rail ESD clamp design with current starving technology

A Robust Scalable ESD Protection Device integrating Drain side Floating P+ Diffusion with tunable ESD Design Window and effective Latch-up immunity for High-Voltage Power Clamp applications

A Low-Leakage Power Clamp ESD Protection Circuit with Prolonged ESD Discharge Time and Compact Detection Network.

High Area Efficiency Bidirectional Silicon-Controlled Rectifier for Low-Voltage Electrostatic Discharge Protection

ESD Circuits Design for High-Speed Analog CMOS Integrated Circuits

On the ESD Protection and Non-Fatal ESD Strike on Nano CMOS Devices