Abstract:With increasing of the speed of the train, the requirement of the performance of the braking friction materials is more and more higher. It is urgent to find new braking materials to satisfy the rigorous using environment. C-f/SiC has the broad application prospects when it is used as a new kind of braking material. On this article, in order to shorten preparation cycle and reduced production costs, short carbon fiber is substituted continuous carbon fiber felt. C-f/SiC brake materials were prepared by the way of molding compression-pressureless sintering with resin binder at 1800 degrees C, 1850 degrees C and 1900 degrees C, respectively. The effect of sintering temperature on bending property of brake material was researched. The experimental results show that with the increase of sintering temperature, the bending strength of C-f/SiC brake materials rose first and then fell. If sintering temperature is too high, which will lead the crystal grain to grow up and the crack is easy to produce. Finally make the bending strength of composites reduced. When sintering at 1850 degrees C, the bending strength of the specimen reached maximum. At the same experimental condition, the bending strength of C-f/SiC brake material sintered at 1850 degrees C is 18.81MPa, compared to the sample sintered at 1800 degrees C and 1900 degrees C, the bending strength of the specimen is increased 14.56% and 5.26%, respectively. The toughening mechanism of carbon fiber debonding and fiber pull were generated in the process of bending fracture. The fracture model of composites is pseudo-ductile type.

High temperature bending properties and failure mechanism of 3D needled C/SiC composites up to 2000 °C

High-temperature tensile behavior of 3D SiC/SiC composites

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 2300 °C

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 1800 °C in Air

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Flexural Properties of Carbon-Carbon Composites at Temperatures Up to 2600 °C

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C

High-temperature constitutive model for three-dimensional needled C/C-SiC composite under tensile loading

High-Temperature Fatigue Degradation Behaviors of a 3D Braided C/SiC with a Thin Interlayer in Different Dry Oxygen Atmospheres

Bending and Thermal Expansion Properties of 3D-C_f/sic Composites

Properties evolution and damage mechanism of SiC/SiC composites after thermal shock at 1300 °C

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Cf/SiC Ceramic Matrix Composites with Extraordinary Thermomechanical Properties up to 2000 °C

Thermophysical and Mechanical Properties of A Three-Dimensional Hi-Nicalon/Sic Composite

Bending and Thermal Expansion Properties of 2.5D C/SiC Composites

High‐temperature tensile strength and fracture behavior of ZrB2‐SiC‐graphite composite

High-temperature tensile strength of C/SiC composite under laser-induced high heating flux in an aerobic environment

Influence of High-Temperature Oxidation and Test Conditions on the Dynamic Mechanical Properties of 2.5D SiCf/SiCm Composites

Thermal stability of CVI and RMI SiC/SiC composites adopting Cansas 3303 SiC fibers

Comparison on failure behavior of three-dimensional woven carbon/carbon composites joints subjected to out-of-plane loading at room and high temperature

Effects of Sintering Temperature on Bending Property of C-F/Sic Brake Material