Abstract:Carbon fibre reinforced silicon carbide (C/SiC) ceramic matrix composites have attracted considerable attention due to their exceptional properties and extensive potential applications as high-temperature structural materials. However, due to their complex structure and manufacturing defects, C/SiC composites exhibit intricate mechanical behaviour under thermal-mechanical-oxidative coupling environments. To date, systematic studies on the internal damage evolution and failure mechanisms of C/SiC composites under high-temperature oxidative environments are lacking. In this study, a combination of synchrotron X-ray micro-computed tomography (SR mu CT) and in-situ experiments under thermal-mechanical-oxidative coupling environments at room temperature and 1650 degrees C in air was used to characterize the internal microstructures and damage evolution processes of C/SiC composites at different loading levels. Additionally, the 3D strain fields during in-situ loading were quantitatively analysed using the Digital Volume Correlation (DVC) method. The findings underscore the substantial impact of oxidative damage on the mechanical response of C/SiC composites, particularly concerning tensile properties and fracture modes. At room temperature, severe delamination, fibre bundle pull-out and interfacial debonding occurred internally. Whereas, under high-temperature atmospheric conditions, severe fibre oxidation reactions occurred at the specimen edges, resulting in rapid porosity escalation. Crack initiation from surface defects followed by rapid inward propagation is observed. Moreover, while the strain distribution remains relatively uniform until fracture, a pronounced concentration of strain is evident near the fracture zones at room temperature, with an even greater concentration observed at 1650 degrees C. Notably, the region of concentrated strain within the 3D deformation field corresponds closely to the final fracture location, as revealed by quantitative DVC analysis.

High-Temperature Fatigue Degradation Behaviors of a 3D Braided C/SiC with a Thin Interlayer in Different Dry Oxygen Atmospheres

Tension-tension Fatigue Behaviour of 3D Braided SiCf/SiC Composite with Film Cooling Holes at 1350 °C in Air

Multiscale investigation on fatigue properties and damage of a 3D braided SiC/SiC plus PyC/SiC composites in the full stress range at 1300 C

EXPERIMENTAL INVESTIGATION ON THE FATIGUE CHARACTERISTICS ABOUT HIGH TEMPERATURE OF PLAIN-WOVEN C/SiC COMPOSITE

FEM Analysis of the Stress Response and Failure Mechanism of SiC-coated Cf/ SiC Composites During Thermal Shock

An Investigation of Dynamic Failure Progress and Properties of 2D C/SiC Composite from 173 K to 1273 K by SHTB

Tensile-tensile fatigue behavior of plain-woven SiCf/SiC ceramic matrix composites with differently spaced film cooling holes and environmental barrier coatings in high-temperature water-oxygen environments

Influence of thermo-exposure at high temperature of flexural behaviors of 3D-C/SiC composite

Tension-tension Fatigue Behavior of a PIP SiC/SiC Composite at Elevated Temperature in Air

Oxidation behaviour of three-dimensional woven C/SiC composites

Tension–tension fatigue damage characteristics of a 3D SiC/SiC composite in H2O–O2–Ar environment at 1300°C

Internal Damage Evolution of C/SiC Composites in Air at 1650 °C Studied by In-Situ Synchrotron X-ray Imaging

High-temperature tensile behavior of 3D SiC/SiC composites

Effects of atmosphere and stress on the thermal shock damage behaviors of 3D C/SiC composite with thin interlayer

Degradation mechanisms of a self-healing SiC (f) /BN (i) /[SiC-B 4 C] (m) composite at high temperature under different oxidizing atmospheres

Fracture Toughness Evolution and Failure Mechanisms of Two-Dimensional SiCf/SiC Composites at Temperatures Up to 1500 °C in Air

The Effects of Crossover Pores on High Temperature Bending Behavior of 3-Dimensional Braided C/Sic

Mechanical properties and microstructure evolution of KD‐SA SiCf/BN/SiC CMCs oxidized at different temperatures

Effect of Atmosphere and Interlayer Thickness on the Mechanical Properties of 3D C/PyC/SiC Composites under Cyclic Stressed and Unstressed Conditions

Oxidation Behavior of SiBC Matrix Modified C/SiC Composites with Different PyC Interphase Thicknesses

Thermal Cycling Damage Mechanisms of C/SiC Composites in Displacement Constraint and Oxidizing Atmosphere