Abstract:Carbon fibre reinforced silicon carbide (C/SiC) ceramic matrix composites have attracted considerable attention due to their exceptional properties and extensive potential applications as high-temperature structural materials. However, due to their complex structure and manufacturing defects, C/SiC composites exhibit intricate mechanical behaviour under thermal-mechanical-oxidative coupling environments. To date, systematic studies on the internal damage evolution and failure mechanisms of C/SiC composites under high-temperature oxidative environments are lacking. In this study, a combination of synchrotron X-ray micro-computed tomography (SR mu CT) and in-situ experiments under thermal-mechanical-oxidative coupling environments at room temperature and 1650 degrees C in air was used to characterize the internal microstructures and damage evolution processes of C/SiC composites at different loading levels. Additionally, the 3D strain fields during in-situ loading were quantitatively analysed using the Digital Volume Correlation (DVC) method. The findings underscore the substantial impact of oxidative damage on the mechanical response of C/SiC composites, particularly concerning tensile properties and fracture modes. At room temperature, severe delamination, fibre bundle pull-out and interfacial debonding occurred internally. Whereas, under high-temperature atmospheric conditions, severe fibre oxidation reactions occurred at the specimen edges, resulting in rapid porosity escalation. Crack initiation from surface defects followed by rapid inward propagation is observed. Moreover, while the strain distribution remains relatively uniform until fracture, a pronounced concentration of strain is evident near the fracture zones at room temperature, with an even greater concentration observed at 1650 degrees C. Notably, the region of concentrated strain within the 3D deformation field corresponds closely to the final fracture location, as revealed by quantitative DVC analysis.

A Modified Iosipescu Method to Study In-Plane Shear Strength of C/SiC Composites at Elevated Temperatures in Air

Failure and Strength of 2D-C/sic Composite under In-Plane Shear Loading at Elevated Temperatures

An Investigation of Dynamic Failure Progress and Properties of 2D C/SiC Composite from 173 K to 1273 K by SHTB

Infrared Thermography For Non-Destructive Evaluation Of 2d C/Sic Composites Under Fatigue Loading

In Situ X-ray Imaging and Numerical Modeling of Damage Accumulation in C/SiC Composites at Temperatures Up to 1200 ℃

FEM Analysis of the Stress Response and Failure Mechanism of SiC-coated Cf/ SiC Composites During Thermal Shock

In-Plane Shear Strength of A Carbon/Carbon Composite at Different Loading Rates and Temperatures

Temperature dependency of interlaminar shear strength of 2D-C/SiC composite

High-temperature tensile behavior of 3D SiC/SiC composites

Tensile Behavior of 2D-C/sic Composites at Elevated Temperatures: Experiment and Modeling

Internal Damage Evolution of C/SiC Composites in Air at 1650 °C Studied by In-Situ Synchrotron X-ray Imaging

Mechanical Behavior of 2D C/SiC Composites at Elevated Temperatures under Uniaxial Compression

Mechanical Behaviors of C/SiC Composites Subjected to Uniaxial Compression at High Temperatures and High Strain Rates

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Internal Damage Evolution Investigation of C/SiC Composites Using In-Situ Tensile X-ray Computed Tomography Testing and Digital Volume Correlation at 1000 °C

High Temperature Fatigue Assessment of a SiCf/SiC Ceramic Matrix Composite Using Advanced Monitoring Techniques

Numerical Simulation of Oxidation‐Assisted Failure of CMC‐SiC at Intermediate Temperature

Fracture Characteristics and In-Situ Damage Mechanism of PIP-C/SiC Composites to Various Temperatures and Loading Velocities

Interlaminar Shear Fatigue of A Two-Dimensional Carbon Fibre Reinforced Silicon Carbide Composite

Tensile Fatigue of a 2.5D-C/sic Composite at Room Temperature and 900°C

Preparation and Analysis of Interlaminar Shear Strength of C/C-SiC Composite