Abstract:3D C-f/SiC-Al composites were achieved through the pressure infiltration of liquid Al-Si alloy into porous 3D C-f/SiC preform, which was produced by different cycles of precursor infiltration and pyrolysis. The effect of silicon carbide volume fraction on the microstructure, anisotropic mechanical response, and thermophysical characteristics of the 3D C-f/SiC-Al composites was investigated. The results demonstrated that the initial microstructure of 3D C-f/SiC can be retained, and the obtained C-f/SiC-Al composites presented remarkable anisotropy characteristics. As the silicon carbide ceramics content increased from 12.5 vol% to 41.8 vol%, the thermal conductivity and thermal expansion coefficient of 3D C-f/SiC-Al composites decreased, whereas the bending strength initially increased and then decreased in the Z-direction. The bending strength perpendicular (Z) to the carbon cloth layer of 3D C-f/SiC-Al composites was higher than that of parallel (X-Y) to the carbon cloth layer. However, a significant anisotropy in the thermal conductivity values was the opposite. The 3D C-f/SiC-Al composite with low ceramic content (17 vol%) had a higher thermal conductivity in the X-Y direction (64 W m(-1) K-1) than in the Z-direction (34 W m(-1) K-1). The thermal expansion coefficient of all the 3D C-f/SiC-Al composites along the X-Y direction also decreased initially and then increased in the range of 100-450 degrees C, which presents low expansion characteristics.

Bending and Thermal Expansion Properties of 3D-C_f/sic Composites

Bending and Thermal Expansion Properties of 2.5D C/SiC Composites

Mechanical Properties of 3D Fiber Reinforced C/SiC Composites

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C

Thermal expansion properties of 3D needled C/SiC-TaC composites

Microstructure and Mechanical Property of 3d Textile C/Sic Composites Fabricated by Chemical Vapor Infiltration

Fabrication and Mechanical Properties of 3-D Cf/C-SiC-TiC Composites Prepared by RMI

Mechanical properties of three-dimensional braided C/SiC composites

Effects of SiC Content on the Mechanical and Thermophysical Properties of 3D Cf/SiC–Al Composites

Preparation and Properties for (SiC)Cf/Si3 N4 Composite

Fabrication of SiCf/SiC Composites by Chemical Vapor Infiltration and Vapor Silicon Infiltration

Microstructure and mechanical properties of 3D needled carbon fibre reinforced carbon and silicon carbide composites

MICROSTRUCTURE OF 3D TEXTILE C/PYC/SIC COMPOSITES PREPARED BY CHEMICAL VAPOR INFILTRATION

Preparation and Properties of 2d C/Zrb2-Sic Ultra High Temperature Ceramic Composites

The Effects of Crossover Pores on High Temperature Bending Behavior of 3-Dimensional Braided C/Sic

High-temperature tensile behavior of 3D SiC/SiC composites

High temperature bending properties and failure mechanism of 3D needled C/SiC composites up to 2000 °C

Preparation and Thermal-Physical Properties of Three Dimensional Bicontinuous SiC/Cu-Si Composite

Microstructure and mechanical properties of SiC fiber/Si-CoSi2 matrix composites fabricated by carbon chemical vapor infiltration and Si alloy melt infiltration process

Microstructure and Mechanical Properties of Three Dimensional Cf/SiC-ZrC-ZrB2 Composites Prepared by Reactive Melt Infiltration Method

Preparation and Properties of 2D C/SiC–ZrB2–TaC Composites