Abstract:Zirconium diboride-silicon carbide based ceramics are attractive for application in aircraft propulsion systems and thermal protection system for hypersonic vehicle because of their high melting point,high thermal and electrical conductivity and good chemical stability.However,the major problems associated with ZrB2/SiC are lack of damage tolerance and insufficient strength as structure components.ZrB2-20%(volume fraction) SiC ceramics with the additional short carbon fiber was developed to promote graceful failure using hot pressing technique. The results show that the introduction of short carbon fiber into the ZrB2-20%SiC matrix results in an apparent increase in fracture toughness from 2.0MPa·m1/2 to 6.56MPa·m1/2 and not evidently change in flexural strength from 502MPa to 445MPa and elastic modulus from 414GPa to 322GPa.Meanwhile the influence of short carbon fiber on the strength,and modulus is analyzed and estimated using a modified role-of-mixture formulation and that on the toughness is also calculated based on the toughening mechanisms of crack bridging,fiber pullout and crack deflection.The calculated results of the strength,elastic modulus and fracture toughness of the composite agree well with the experimental results.

Fabrication and Properties of Short Carbon Fiber-ZrB2 Ceramic Matrix Composites

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Analysis of the Mechanical Properties in Short Carbon Fiber-toughened ZrB2—SiC Ultra-high Temperature Ceramic

Toughening Effect of Short Carbon Fibers in the ZrB2–ZrSi2 Ceramic Composites

Processing and Mechanical Properties of Short Carbon Fibers Toughened Zirconium Diboride-Based Ceramics

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Microstructural Evolution and Performance of Carbon Fiber-Toughened ZrB2 Ceramics with SiC or ZrSi2 Additive

Fabrication and mechanical properties of ZrB2–SiCw ceramic matrix composite

Microstructure and high temperature mechanical properties of hot-pressed ZrB2-based composites

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Effect of Pyrolytic Carbon Coating on the Microstructure and Fracture Behavior of the Cf/ZrB2-SiC Composite

Influence of the Microstructure Evolution of ZrO2 Fiber on the Fracture Toughness of ZrB2–SiC Nanocomposite Ceramics

Microstructure, Mechanical Properties and Thermal Shock Resistance of Zirconium Diboride Containing Silicon Carbide Ceramic Toughened by Carbon Black

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

Microstructure and mechanical properties of ZrB2–SiC–ZrO2f ceramic

Microstructure, Mechanical Properties and Thermal Shock Resistance of ZrB 2 -Sic-c F Composite with Inhibited Degradation of Carbon Fibers

Characterization and mechanical properties of Cf/ZrB2-SiC composites fabricated by a hybrid technique based on slurry impregnation, polymer infiltration and pyrolysis and low-temperature hot pressing

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites

Enhanced Strengths and Thermal Shock Resistance of SiC-BN-10 Vol% Cf Composites Through ZrB2 Addition

Microstructure and properties of silicon carbide whisker reinforced zirconium diboride ultra-high temperature ceramics

ZrB2 matrix ceramic composites by hot-pressed and SiC whisker reinforced