Abstract:The addition of nanoparticles can greatly improve the mechanical properties of ceramic materials at room temperature, but the research on the toughening and strengthening effect of nanoparticles at high temperature is less reported. In this paper, the evolution law and evolution mechanisms of the mechanical properties including Vickers hardness, fracture toughness and flexural strength as well as elastic modulus of TiC nanoparticles dispersed Al2O3/SiCw ceramic materials (Al2O3/SiCw/TiCn) at high temperature (up to 1200 degrees C) were meticulously investigated compared with those of Al2O3/SiCw. The results showed that the Vickers hardness and fracture toughness of Al2O3/SiCw/TiCn were higher than those of Al2O3/SiCw ceramic materials at both room and elevated temperature. Although the flexural strength of the Al2O3/SiCw ceramic materials was improved by the addition of nanoparticles at room temperature, the intergranular fracture tended to occur along the refined matrix grains at high temperature, resulting in lower high temperature flexural strength of Al2O3/SiCw/TiCn composite. The Vickers hardness of both the two composites decreased with increasing temperature (20-1000 degrees C). At 1000 degrees C, the hot hardness of the composite with TiC nanoparticles addition was still maintained 68.4% of hardness at room temperature. The fracture toughness of the two composites decreased rapidly from 900 degrees C above but increased to a peak at 1200 degrees C. The addition of TiC nanoparticles played a positive role for improving the hot hardness and high temperature fracture toughness, but was not conducive to the high temperature flexural strength. (c) 2017 Elsevier B.V. All rights reserved.

High-temperature mechanical properties of ZrB2/SiC/Si3N4 ceramic tool materials with dual composite architectures

Mechanical properties of ZrB2/SiC/WC ceramic tool materials from room temperature to 1100 °C and cutting performance

Fabrication and mechanical properties of ZrB2–SiCw ceramic matrix composite

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Flexural Strength and Fracture Behavior of ZrB2–SiC Ultra-High Temperature Ceramic Composites at 1800°C

Effects of ZrB2 on Mechanical Properties of Al2O3-ZrB2-SiC Composite Ceramics at Room Temperature

Microstructures and Mechanical Properties of ZrB2–SiC–Ni Ceramic Composites Prepared by Spark Plasma Sintering

Microstructure and high temperature mechanical properties of hot-pressed ZrB2-based composites

Mechanical properties and microstructure of spark plasma sintered Al2O3-SiCw-Si3N4 composite ceramic tool materials

Evolution Mechanisms of High Temperature Mechanical Properties and Microstructures of Al2O3/SiCw/TiCn Nanocomposite Materials

High-Performance Zrb2-Sic-C-F Composite Prepared by Low-Temperature Hot Pressing Using Nanosized Zrb2 Powder

Preparation and characterization of C/SiC–ZrB2 composites by precursor infiltration and pyrolysis process

Electrostatic Assembly Preparation of High-Toughness Zirconium Diboride-Based Ceramic Composites with Enhanced Thermal Shock Resistance Performance

Mechanical Properties of NanoSiC Reinforced ZrB2-Based Ceramic Composite

Fabrication and Properties of Short Carbon Fiber-ZrB2 Ceramic Matrix Composites

Characterization and mechanical properties of Cf/ZrB2-SiC composites fabricated by a hybrid technique based on slurry impregnation, polymer infiltration and pyrolysis and low-temperature hot pressing

Analysis of the Mechanical Properties in Short Carbon Fiber-toughened ZrB2—SiC Ultra-high Temperature Ceramic

Microstructural Evolution and Performance of Carbon Fiber-Toughened ZrB2 Ceramics with SiC or ZrSi2 Additive

High temperature mechanical properties of Al2O3-based ceramic tool material toughened by SiC whiskers and nanoparticles

Mechanical Properties and In-Situ Toughening Mechanism of Pressurelessly Densified ZrB2–TiB2 Ceramic Composites

Microstructure and Mechanical Properties of Sic Whisker-Reinforced Zrb2 Ultra-High Temperature Ceramic