Abstract:Zirconium diboride-silicon carbide based ceramics are attractive for application in aircraft propulsion systems and thermal protection system for hypersonic vehicle because of their high melting point,high thermal and electrical conductivity and good chemical stability.However,the major problems associated with ZrB2/SiC are lack of damage tolerance and insufficient strength as structure components.ZrB2-20%(volume fraction) SiC ceramics with the additional short carbon fiber was developed to promote graceful failure using hot pressing technique. The results show that the introduction of short carbon fiber into the ZrB2-20%SiC matrix results in an apparent increase in fracture toughness from 2.0MPa·m1/2 to 6.56MPa·m1/2 and not evidently change in flexural strength from 502MPa to 445MPa and elastic modulus from 414GPa to 322GPa.Meanwhile the influence of short carbon fiber on the strength,and modulus is analyzed and estimated using a modified role-of-mixture formulation and that on the toughness is also calculated based on the toughening mechanisms of crack bridging,fiber pullout and crack deflection.The calculated results of the strength,elastic modulus and fracture toughness of the composite agree well with the experimental results.

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Analysis of the Mechanical Properties in Short Carbon Fiber-toughened ZrB2—SiC Ultra-high Temperature Ceramic

Microstructure, Mechanical Properties and Thermal Shock Resistance of ZrB 2 -Sic-c F Composite with Inhibited Degradation of Carbon Fibers

Oxidation Resistance Behavior of Short Carbon Fiber Reinforced ZrB2,-SiC Composites

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

Microstructure and high temperature mechanical properties of hot-pressed ZrB2-based composites

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Preparation and Characterization of High-Performance ZrB 2 –sic–cf Composites Sintered at 1450 °C

High-Performance Zrb2-Sic-C-F Composite Prepared by Low-Temperature Hot Pressing Using Nanosized Zrb2 Powder

Microstructural Evolution and Performance of Carbon Fiber-Toughened ZrB2 Ceramics with SiC or ZrSi2 Additive

Long-term oxidation and ablation behavior of C<sub>f</sub>/ZrB<sub>2</sub>-SiC composites at 1500, 2000, and 2200C

Fabrication and Characterization of B4C–ZrB2–SiC Ceramics with Simultaneously Improved High Temperature Strength and Oxidation Resistance Up to 1600 °C

Long‐term oxidation and ablation behavior of Cf/ZrB2–SiC composites at 1500, 2000, and 2200°C

Fabrication and Properties of Short Carbon Fiber-ZrB2 Ceramic Matrix Composites

Characterization and mechanical properties of Cf/ZrB2-SiC composites fabricated by a hybrid technique based on slurry impregnation, polymer infiltration and pyrolysis and low-temperature hot pressing

High-Temperature Oxidation Resistance of ZrB2-SiC Ceramic Composites Prepared by Reactive Hot Pressing

Enhanced Oxidation Properties Of Zrb2-Sic Composite With Short Carbon Fibers At 1600 Degrees C

Toughening Effect of Short Carbon Fibers in the ZrB2–ZrSi2 Ceramic Composites

Preparation and characterization of C/SiC–ZrB2 composites by precursor infiltration and pyrolysis process

Design and Preparation of an Ultra-High Temperature Ceramic by In-Situ Introduction of Zr2[Al(Si)]4C5 into ZrB2-SiC: Investigation on the Mechanical Properties and Oxidation Behavior