Abstract:In order to investigate the effect of different matrices on the bending properties and fracture behavior of the continuous W-core-SiC fiber-reinforced aluminum matrix (SiCf/Al) composites, 30 vol.% SiCf/2024Al and 30 vol.% SiCf/6061Al composites were prepared via matrix coating and hot isostatic pressing. Samples from these composites were subjected to the push-out test and three-point bending test with in situ SEM. The microstructure of the SiCf/Al composites was examined by SEM and TEM. Results showed that there were coarse AlCuFeMn and Al2Cu phases in the matrix of the SiCf/2024Al composite, and needle-like Al4C3 phase at the interface between fiber and matrix. For the SiCf/6061Al composite, there were no coarse second phase in the matrix and no Al4C3 phase at the interface between fiber and matrix. The interfacial shear strength of the SiCf/2024Al composite (~ 37 MPa) was relatively larger than that of the SiCf/6061Al composite (~ 34 MPa), indicating a relatively strong interface bonding for the SiCf/2024Al composite. The bending strength of the SiCf/6061Al composite (1091 MPa) was superior to that of the SiCf/2024Al composite (968 MPa). For 30 vol.% SiCf/2024Al composite, cracks were initiated at the edge of the coarse second phase under bending load and propagated along the grain boundary of matrix. The crack passed directly through SiC fibers due to the strong interface bonding and needle-like Al4C3 phases formed by interfacial reaction, and the propagation rate was fast. For 30 vol.% SiCf/6061Al composite, the crack was initiated at the interface between fiber and matrix when the plastic deformation of matrix was retarded at the first SiC fiber. Then, the crack passed around SiC fibers and propagated in forms of crack bridging and deflection due to the suitable interface bonding, and the propagation rate was slow.

Microstructure and mechanical properties of SiC fiber/Si-CoSi2 matrix composites fabricated by carbon chemical vapor infiltration and Si alloy melt infiltration process

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Mechanical Properties of 3D KD-I SiCf/SiC Composites with Engineered Fibre–matrix Interfaces

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Mechanical properties of SiC fiber/carbon/Si‐Co matrix composites processed using film boiling and melt infiltration

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

3D-SiC decorated with SiC whiskers: Chemical vapor infiltration on the porous 3D-SiC lattices derived from polycarbosilane-based suspensions

Effect of chemical vapor infiltration on the flexural properties of C/C-SiC composites prepared by the precursor infiltration pyrolysis method

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

Structure and properties of fine diameter continuous SiC ceramic fiber reinforced Al matrix composites

Bending Properties and Failure Mechanism of Continuous W-Core-SiC Fiber-Reinforced 2024 and 6061 Aluminum Matrix Composites

Bending and Thermal Expansion Properties of 3D-C_f/sic Composites

Effect of CVI SiC interphase on tensile properties of SiC fibers with different surfaces

Study on Microstructures of 2D and 3D Chemical Vapor Infiltration SiC/SiC Composites

Preparation and tensile behavior of SiCf/SiC mini composites containing different types and thicknesses of interphase

Microstructure and Mechanical Properties of Cf/SiC Composites with Dispersed C-SiC Interphase Prepared by Chemical Vapor Infiltration

Experimental and Numerical Investigations of Tensile Properties of SiC Particle‐Reinforced Composites

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites