Abstract:For this study, orthogonal three dimensional (3D) woven silicon carbide (SiC) fiber (Hi-Nicalon, Hi-Nicalon Type S) -reinforced Si-CoSi 2 matrix composites (SiC fiber/Si-CoSi 2 composites) were fabricated and the microstructures and mechanical properties were characterized. The SiC fibers (28% fiber volume fraction) woven into orthogonal 3D fabrics and used as reinforcement were coated with chemical vapor infiltration (CVI)-carbon to control the fiber–matrix interface. The composite material infiltrated with Si-CoSi 2 was produced using a melt-infiltration process. Four-point bending tests conducted at room temperature showed bending strength exceeding 300 MPa and tensile fracture strain exceeding 0.7%. Furthermore, bending strength greater than 400 MPa was found from a high-temperature four-point bending test under an Ar atmosphere. The failure mode was quasi-ductile. Fiber pull-out and fiber cross-linking were observed clearly. Melt infiltration of the Si-Co alloy caused little damage to the SiC fibers, confirming CVI-C layer protection of the fibers during melt infiltration and confirming that the layer can control mechanical properties at the fiber–matrix interface.

Effect of CVI SiC interphase on tensile properties of SiC fibers with different surfaces

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Effects of Interphases on Mechanical Properties of CVI-mini SiCf/SiC Composites

Effects of interphases on mechanical properties of CVI-mini SiC<sub>f</sub>/SiC composites

The effect of deposition temperature of BN interphase on the tensile properties of SiC fibers

Influence of CVD Carbon Coating on SiC Fiber Property

Influence of fiber surface properties of SiCf/SiC composites on the interfacial debonding behavior

Effects of Dip-Coated Bn Interphase on Mechanical Properties of Sicf/Sic Composites Prepared by Cvi Process

Effect of Fiber Surface Treatment on Tensile Strength of C/SiC Composites

Effects of CVD C or SiC on the Mechanical and Chemical Properties of Carbon Fibers

Microstructure, Interfacial and Mechanical Properties of SiC Interphase Modified C/C-SiC Composites Prepared by Reactive Melt Infiltration

Measurement and Evaluation of the Tensile Strength of Chinese CVD SiC Fibers

Microstructure and mechanical properties of SiC fiber/Si-CoSi2 matrix composites fabricated by carbon chemical vapor infiltration and Si alloy melt infiltration process

Study on the Mechanical Property of High‐Performance Silicon Carbide Fiber

Effect of CVD SiC Surface-coating on the Single Fiber Strength of SiC Fibers

Effect of W/SiC interfacial reaction layer on tensile and fracture behavior of SiC fibre

Influence of Carbon Coat by Chemical Vapor Deposition on Tensile Behavior and Fracture Characteristics of SiC Filament

Influence of Substrate Material on Tensile Behavior and Fracture Characteristics of SiC by Chemical Vapour Deposition

Preparation and mechanical behavior of Yb2Si2O7 interphase in SiCf/SiC minicomposites

Microstructure and flexural properties of C/SiC composites by CVI-RMI method

Thermal stability of CVI and RMI SiC/SiC composites adopting Cansas 3303 SiC fibers