Microstructure control of BN interface and its effect on mechanical behavior of SiC f /SiC composites

Jiajia Sun,Wei Liu,Xiaoxu Lv,Jian Jiao

DOI: https://doi.org/10.1016/j.vacuum.2023.112630

IF: 4

2023-09-22

Vacuum

Abstract:Chemical vapor infiltration (CVI) of BCl 3 and NH 3 at low temperature was used to synthesize the BN interface of SiC f /SiC composites. The structure of the BN interface was adjusted by changing the deposition pressure, and its effect on the mechanical properties of SiC f /SiC composites was studied. The BN interface showed a quasi-isotropic microstructure when the deposition pressure was low at 500 Pa. After increasing the deposition pressure to 1500Pa, the crystallinity of BN improves and some high-crystallized domains appear. The later tensile test illustrated that increasing the deposition pressure of BN interface could enhance the matrix cracking stress but decrease the fracture toughness , indicating that the BN interface deposited at high pressure has higher bonding strength. It can be attributed to that the high-crystallized BN layers vertical to the SiC fibers suffering in-plane shear stress, which impedes the deformation and cracking of the BN interface. Our research provides a deep insight into the relationship between the structure and performance of composites, and a guiding significance in the preparation of high-strength and high-toughness SiC f /SiC composites.

materials science, multidisciplinary,physics, applied