Abstract:SiC/SiC minicomposites with BN interfaces were fabricated by a two-step route comprising dip-coating and polymer impregnation and pyrolysis (PIP). The thickness of the dip-coated BN interface was in the range of 76–300 nm, which was adjusted by dipping times. The influences of BN interface thickness on the mechanical behavior of the as-fabricated SiC/SiC minicomposites were investigated. The mechanical properties of SiC/SiC composites were improved by introducing BN interfaces, which showed an optimized tensile strength distribution with a higher Weibull modulus m. The optimal mechanical properties could be obtained in SiC/BN/SiC-2 samples with the BN interface thickness of ~160 nm. The variation trend of tensile strengths caused by the increasing interface thickness was analyzed using a probabilistic-statistical model. Especially, both the interface delamination caused by the secondary crack and the fiber Weibull parameter mfiber influenced by the BN interface coating were considered in the probabilistic-statistical model, leading to a better matching between the experimental results and the model simulation. Microstructure characterization combined with numerical analysis showed that the dip-coated BN interface with appropriate thickness played an important role in improving the mechanical properties of SiC/SiC minicomposites. The results indicated that both the ability of crack deflection of interfaces and the fiber in-situ strengths should be considered in the interface design of SiC/SiC composites.

Relationship between both thickness and degree of crystallisation of BN interphases and the mechanical behaviour of SiC/SiC composites

Effects of Interphases on Mechanical Properties of CVI-mini SiCf/SiC Composites

Effects of interphases on mechanical properties of CVI-mini SiC<sub>f</sub>/SiC composites

Microstructure control of BN interface and its effect on mechanical behavior of SiC f /SiC composites

Effect of BN/SiC Interfacial Coatings on the Tensile Properties of SiC/SiC Minicomposites Fabricated by PIP

Effect of BN interfacial layer on the mechanical behavior of SiC fiber reinforced SiC ceramic matrix composites

Effects of BN/SiC Dual-Layer Interphase on Mechanical and Dielectric Properties of SiCf/SiC Composites

Mechanical properties of SiCf/SiC composites with h‐BN interphase formed by the electrophoretic deposition method

Microstructure and Mechanical Properties of Si3N4f/BN Composites with BN Interphase Prepared by Chemical Vapor Deposition of Borazine

Influence of Dip-Coated Boron Nitride Interphase on Mechanical and Dielectric Properties of SiCf/SiC Composites

Effect of BNNTs/matrix interface tailoring on toughness and fracture morphology of hierarchical SiCf/SiC composites

Influences of the dip-coated BN interface on mechanical behavior of PIP-SiC/SiC minicomposites

Influence of hBN content on mechanical and tribological properties of Si3N4/BN ceramic composites

Quantitative In-Situ Study of Strength-Governed Interfacial Failure Between H-Bn and Polymer-Derived Ceramic

Effects of Dip-Coated Bn Interphase on Mechanical Properties of Sicf/Sic Composites Prepared by Cvi Process

A Novel Strategy to Prepare BN Interface and Its Effects on Microstructure and Properties of SiCw/BN/SiC Composites

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Influence of thickness of pyrolytic carbon interphase on the mechanical behavior of SiC/(BN/PyC)/SiC composites

Dip-Coating of Boron Nitride Interphase and Its Effects on Mechanical Properties of Sicf/Sic Composites

Effect of PyC/BN interfacial phases on mechanical behavior of SiC/SiC composites

Boron nitride (BN) and BN based multiple-layer interphase for SiCf/SiC composites: A review