Abstract:Remarkably improved dielectric properties including high-k, low loss, and high breakdown strength combined with promising mechanical performance such as high flexibility, good heat, and chemical resistivity are hard to be achieved in high-k dielectric composites based on the current composite fabrication strategy. In this work, a family of high-k polymer nanocomposites has been fabricated from a facile suspension cast process followed by chemical cross-linking at elevated temperature. Internal double bonds bearing poly(vinylidene fluoride-chlorotrifluoroethylene) (P(VDF-CTFE-DB)) in total amorphous phase are employed as cross-linkable polymer matrix. α-SiC particles with a diameter of 500 nm are surface modified with 3-aminpropyltriethoxysilane (KH-550) as fillers for their comparable dielectric performance with PVDF polymer matrix, low conductivity, and high breakdown strength. The interface between SiC particles and PVDF matrix has been finely tailored, which leads to the significantly elevated dielectric constant from 10 to over 120 in SiC particles due to the strong induced polarization. As a result, a remarkably improved dielectric constant (ca. 70) has been observed in c-PVDF/m-SiC composites bearing 36 vol % SiC, which could be perfectly predicted by the effective medium approximation (EMA) model. The optimized interface and enhanced compatibility between two components are also responsible for the depressed conductivity and dielectric loss in the resultant composites. Chemical cross-linking constructed in the composites results in promising mechanical flexibility, good heat and chemical stability, and elevated tensile performance of the composites. Therefore, excellent dielectric and mechanical properties are finely balanced in the PVDF/α-SiC composites. This work might provide a facile and effective strategy to fabricate high-k dielectric composites with promising comprehensive performance.

Mechanical Properties of 3D KD-I SiCf/SiC Composites with Engineered Fibre–matrix Interfaces

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Effects of the fiber surface characteristics on the interfacial microstructure and mechanical properties of the KD SiC fiber reinforced SiC matrix composites

Mechanical Properties and Failure Behavior of 3D-SiCf/SiC Composites with Different Interphases

The Effect of PyC/SiC Compound Interphase on the Properties of PIP SiC/SiC Composite

Microstructure and mechanical properties of 3D Cf/SiBCN composites fabricated by polymer infiltration and pyrolysis

Effect of PyC/BN interfacial phases on mechanical behavior of SiC/SiC composites

Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routes

Preparation and tensile behavior of SiCf/SiC mini composites containing different types and thicknesses of interphase

Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite

Influence of polycarbosilane composition on the properties of SiC/SiC composite fabricated by precursor infiltration and pyrolysis process

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Microstructure and mechanical properties of SiC fiber/Si-CoSi2 matrix composites fabricated by carbon chemical vapor infiltration and Si alloy melt infiltration process

Fabrication of 3D-SiC/aluminum alloy interpenetrating composites by DIW and pressureless infiltration

Residual stress and interface debonding behavior in Si3N4w reinforced SiCN composites prepared by the PIP process: A case study

High Dielectric and Mechanical Properties Achieved in Cross-Linked PVDF/α-SiC Nanocomposites with Elevated Compatibility and Induced Polarization at the Interface

Fabrication and Mechanical Properties of SiCw(p)/SiC-Si Composites by Liquid Si Infiltration using Pyrolysed Rice Husks and SiC Powders as Precursors

Construction of sandwich-structured C/C-SiC and C/C-SiC-ZrC composites with good mechanical and anti-ablation properties

Microstructure and mechanical properties of quasi-isotropic chopped fiber-reinforced PyC–SiC matrix composite prepared by novel nondamaging method