Abstract:The composite processing technique and nanofiller concentration and its functionalization significantly alter the properties of polymer nanocomposites. To realize this, multi-walled carbon nanotubes (CNT) were dispersed in a poly(vinylidene fluoride) (PVDF) matrix at carefully selected CNT concentrations by two illustrious methods, such as solution-cast and melt-mixing. Notwithstanding the processing method, CNTs induced predominantly the γ-phase in PVDF, instead of the commonly obtained β-phase upon nanofiller incorporation, and imparted significant improvements in dielectric properties. Acid-treatment of CNT improved its dispersion and interfacial adhesion significantly with PVDF, and induced a higher γ-phase content and better dielectric properties in PVDF as compared to pristine CNT. Further, the γ-phase content was found to be higher in solution-cast composites than that in melt-mixed counterparts, most likely due to solvent-induced crystallization in a controlled environment and slow solvent evaporation in the former case. However, interestingly, the melt-mixed composites showed a significantly higher dielectric constant at the onset of the CNT networked-structure as compared to the solution-cast composites. This suggests the possible role of CNT breakage during melt-mixing, which might lead to higher space-charge polarization at the polymer-CNT interface, and in turn an increased number of pseudo-microcapacitors in these composites than the solution-cast counterparts. Notably, PVDF with 0.13 vol% (volume fraction, f c = 0.0013) of acid-treated CNTs, prepared by melt-mixing, displayed the relative permittivity of ∼217 and capacitance of ∼5430 pF, loss tangent of ∼0.4 at 1 kHz and an unprecedented figure of merit of ∼10(5). We suggest a simple hypothesis for the γ-phase formation and evolution of the high dielectric constant in these composites. Further, the high-dielectric composite film showed marked improvements in mechanical and thermal properties over the neat PVDF film. These composites with exceptional dielectric properties and concomitant improvement in mechanical and thermal properties offer a great promise for use in flexible and mechanically robust charge storage devices.

High Dielectric and Mechanical Properties Achieved in Cross-Linked PVDF/α-SiC Nanocomposites with Elevated Compatibility and Induced Polarization at the Interface

Mechanical Properties of 3D KD-I SiCf/SiC Composites with Engineered Fibre–matrix Interfaces

Realizing enhanced dielectric and mechanical performance of polyvinylidene fluoride/SiC nanocomposites through a bio-inspired interface design

Strong Induced Polarity Between Poly(Vinylidene Fluoride-Co-Chlorotrifluoroethylene) And Alpha-Sic And Its Influence On Dielectric Permittivity And Loss Of Their Composites

Enhancing High-Frequency Dielectric Properties of Beta-SiC Filled Nanocomposites from Synergy between Percolation and Polarization

Achieving thermally conductive low loss PVDF-based dielectric composites via surface functionalization and orientation of SiC nanowires

Significantly Enhanced Dielectric Performances and High Thermal Conductivity in Poly(vinylidene fluoride)-Based Composites Enabled by SiC@SiO2 Core-Shell Whiskers Alignment

Concurrently Enhanced Dielectric Properties and Thermal Conductivity in PVDF Composites with Core-Shell Structured Β-Sicw@sio2 Whiskers

Enhanced Thermal Conductivity and Microwave Dielectric Properties by Mesostructural Design of Multiphase Nanocomposite

Chemical bonding-induced low dielectric loss and low conductivity in high-K poly(vinylidenefluoride-trifluorethylene)/graphene nanosheets nanocomposites.

High dielectric permittivity and improved mechanical and thermal properties of poly(vinylidene fluoride) composites with low carbon nanotube content: effect of composite processing on phase behavior and dielectric properties

Synchronous Enhancements in Dielectric Performances and Thermal Conductivity of Β-Sicw/pvdf Nanocomposites Through Building Crystalline SiO2 Shell As an Interlayer

Insights into Synchronously Enhanced Dielectric Properties and Thermal Conductivity of Β-Sicw/pvdf Nanocomposites by Building a Crystalline SiO2 Shell As an Interlayer

Improved breakdown strengths and energy storage properties of polyimide composites: The effect of internal interfaces of C/ SiO 2 hybrid nanoparticles

Enhanced Thermal Conductivity of Polymer Composite by Adding Fishbone-like Silicon Carbide

Enhanced thermal conductivity and dielectric properties of Al/ β -SiC w /PVDF composites

Interface modified Si@SiO<sub>2</sub>/PVDF composite dielectrics with synchronously ameliorative dielectric and mechanical properties

Interface modified Si@SiO2/PVDF composite dielectrics with synchronously ameliorative dielectric and mechanical properties

Facile Preparation and Properties of Polyvinylidene Fluoride Dielectric Nanocomposites Via Phase Morphology Control and Incorporation of Multiwalled Carbon Nanotubes Conductive Fillers

Surface-coated Polymer Nanocomposites Containing Z-Aligned High-K Nanowires As High-Performance Dielectrics at Elevated Temperatures

High dielectric polymer composites from thermal-induced in-situ formation of conjugated structures and reduced graphene oxide