Abstract:Blending high-permittivity (εr) ceramic powders or conductive fillers into polymers to form 0-3-type composites has been regarded as one of the most promising processes to achieve high-dielectric-permittivity materials with excellent processing performance. The high dielectric loss and conductivity induced by the interface between the matrix and fillers as well as the leakage current have long been a great challenge of dielectric composites, and the resolution of these challenges is still an open question. In this work, poly(vinylidenefluoride-trifluorethylene with double bonds)/graphene nanosheets (P(VDF-TrFE-DB)/GNS) terpolymer nanocomposites were fabricated via a solution-cast process. GNSs were functionalized with KH550 to improve the dispersion in the terpolymer matrix solution and crosslinked with P(VDF-TrFE-DB) by a free-radical addition reaction in the nanocomposites. Compared with neat terpolymer, significantly increased dielectric permittivity and a low loss were observed for the composites. For instance, at 1 kHz the P(VDF-TrFE-DB)/GNS composites with 4 vol % GNS possessed a dielectric permittivity of 74, which is over seven times larger than that of neat terpolymer. However, a rather low dielectric loss (0.08 at 1 kHz) and conductivity (3.47 × 10(-7) S/m at 1 kHz) are observed in the P(VDF-TrFE-DB)/GNS composites containing up to 12 vol % GNS. The covalent bonding constructed between P(VDF-TrFE-DB) and GNS is responsible for the reduced aspect ratio of the GNS and the crystalline properties of P(VDF-TrFE-DB) as well as the improved compatibility between them. As a result, the high-dielectric-loss conductivity of polymer composites, mainly induced by conduction loss and the interface polarization between the matrix and filler, were effectively restricted. Meanwhile, the 3D network established between P(VDF-TrFE-DB) and GNS endows the P(VDF-TrFE-DB)/GNS composites at high temperature with excellent mechanical and dielectric properties. Besides preparing high-performance dielectric composites, this facile route may also be utilized to fabricate high-performance nanocomposites by inhibiting the poor compatibility between fillers and polymeric matrix.

High dielectric polymer composites from thermal-induced in-situ formation of conjugated structures and reduced graphene oxide

High Dielectric CsPbBr3/rGO/polyimide Composite Prepared Via In-Situ Conversion of Fillers

Polyarylene Ether Nitrile Dielectric Composites with Good Formability and Processability

In Situ Fabrication of High Dielectric Constant Composite Films with Good Mechanical and Thermal Properties by Controlled Reduction

Flexible Hdc-G Reinforced Polyimide Composites with High Dielectric Permittivity

Improved Dielectric Permittivity and Energy Density of Layered Polymer Composites Through the Incorporation of Ultralow Amounts of RGO@BTO Hybrid Nanosheets

Highly Thermally Conductive Dielectric Nanocomposites with Synergistic Alignments of Graphene and Boron Nitride Nanosheets

Fluoro-polymer functionalized graphene for flexible ferroelectric polymer-based high-k nanocomposites with suppressed dielectric loss and low percolation threshold.

Plate-barrier architecture of rGO-TiO2 derived from MXene for constructing well-aligned polymer nanocomposites with excellent dielectric performance

Using a novel rigid-fluoride polymer to control the interfacial thickness of graphene and tailor the dielectric behavior of poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) nanocomposites.

Improved Dielectric Properties of Nanocomposites Based on Poly(vinylidene Fluoride) and Poly(vinyl Alcohol)-Functionalized Graphene

High Dielectric Permittivity and Low Loss of Polyvinylidene Fluoride Filled with Carbon Additives: Expanded Graphite Versus Reduced Graphene Oxide

Enhanced dielectric material of multi-functional PVDF/RGO composites

Chemical bonding-induced low dielectric loss and low conductivity in high-K poly(vinylidenefluoride-trifluorethylene)/graphene nanosheets nanocomposites.

High-Dielectric PVP@PANI/PDMS Composites Fabricated via an Electric Field-Assisted Approach

Fabrication Of Graphene Oxide/Nickelous Hydroxide Nanosheets Hybrid Filler To Improve The Energy Density Of Poly(Vinylidene Fluoride) Based Dielectric Composites

Graphene-based composite materials with high dielectric permittivity via an in situ reduction method

An Enhancement on the Dielectric Performance of Poly(vinylidene Fluoride)-Based Composite with Graphene Oxide-Batio3 Hybrid

Morphology-controllable Graphene–tio2 Nanorod Hybrid Nanostructures for Polymer Composites with High Dielectric Performance

Inserting insulating barriers into conductive particle channels: A new paradigm for fabricating polymer composites with high dielectric permittivity and low dielectric loss

Enhanced Dielectric Properties of Ferroelectric Polymer with Perflurooctanoic Acid Doped Reduced Polyaniline/reduced Graphene Oxide Fillers