Abstract:Introduction. Products containing WC-Co cemented tungsten carbides are commonly used in various industries. It is often operates at elevated temperatures, at which, as noted in the literature, tungsten carbides are susceptible to severe oxidation in air. However, no sufficiently accurate values of oxidation temperatures and dependence of these temperatures and the oxidation rate of tungsten carbides on the cobalt content with its wide variation have been established. The subject of the study is the oxidation process of WC-Co cemented tungsten carbides. The purpose of the work is to obtain the oxidation temperatures of WC-Co cemented tungsten carbides with different cobalt content by weight in the range of 3–20 %. Methods. The dynamics of oxidation was studied in air. Specimens of the same length were heated to a temperature of 850 °C and cooled at the same rate in the furnace of a push-rod dilatometer Netzsch 402 PC while its expansion was simultaneously recorded. The oxidation rate of the specimens was determined by the difference in its length before heating and after cooling. The values of oxidation temperatures were obtained by mathematical analysis of relationships of the expansion on temperature. Results and discussion. Experimental dependences of expansion of WC-Co cemented tungsten carbides on temperature in the range from 20 to 850 °C, and for WC-8Co – up to 1,150 °C, were obtained. The oxidation rate of WC-Co cemented tungsten carbides increased linearly with increasing concentration of tungsten carbides (decreased with increasing cobalt content). During heating, two characteristic temperatures were identified: the onset of oxidation (631±4 °C) and the transition to active oxidation (804±11 °C). The established temperatures were the same for different ratios of tungsten carbides and cobalt. The results can be used when choosing temperature conditions for products made from WC-Co cemented tungsten carbides.

Fabrication of tungsten oxide powder from WC–Co cemented carbide scraps by oxidation behaviour

Preparation Technology of Ultra-Fine Tungsten Carbide Powders: an Overview

Ultrafine and Nanoscaled Tungsten Carbide Synthesis from Colloidal Carbon Coated Nano Tungsten Precursor

Preparation of nano-scaled WC powder by low-temperature carbothermic reduction method

Preparation of Nanoscale WC Powders by Sol-Gel Synthesis and Carbon Monoxide Carbonization

A short and facile process to synthesize WC-Co cemented carbides

A Novel Approach to the Rapid in Situ Synthesis of Tungsten Carbide Nanopowder by Plasma Milling and Carbothermal Reduction

Mechanism of the early stages of oxidation of WC–Co cemented carbides

Synthesis of Nano Tungsten Carbide Via Loose Yellow Tungsten Oxide Rod Processing

A facile route to prepare ODS WC Co cemented carbides

A New Strategy to Efficiently Fabricate Tungsten Carbide Coating on Tungsten: Two-step Interstitial Carburization

Effect of (Ti,W)C/TaC addition on the early oxidation behavior of surface layer of WC-Co cemented carbides

Study on the oxidation of WC-Co cemented carbide under different conditions

Rapid synthesis of ultrafine WC-Co cemented carbides by in-situ reactions and spark plasma sintering

Oxidation Behavior of Tungsten Carbide-6% Cobalt Cemented Carbide

Efficient separation and recovery of cobalt from grinding waste of cemented carbide using a sulfuric acid-sodium persulfate mixed solution

Oxidation temperatures of WC-Co cemented tungsten carbides

Preparation and characterization of W@WCx composite powder by oxidation-vacuum carbonization process

Fabrication of spherical WC-Co powders by radio frequency inductively coupled plasma and a consequent heat treatment

Oxidation behavior of functionally graded cemented carbides with CoNiFeCr multi-principal-element alloy binder

Amorphous Carbon Modified Nano-Sized Tungsten Carbide As A Gas Diffusion Electrode Catalyst for the Oxygen Reduction Reaction