Abstract:Cu-SSZ-13 zeolite has attracted great interest owing to its extraordinary performance in the selective catalytic reduction of NOx with NH3 (NH3-SCR); however, the high expense in the costly templates for synthesizing SSZ-13 remains a serious obstacle for its application in large scale, which exacts alternative methods to get SSZ-13 of high performance in NH3-SCR at reduced cost. In this work, a series of methods, including the interzeolite conversion from X and Y zeolites (to get SZ-XC and SZ-YC, respectively) and the assistance with seed crystal and fluorine ion (to get SZ-S and SZ-F, respectively), were used to synthesize the Al-rich Cu-SSZ-13 zeolites; the influence of preparation method on the Al distribution, hydrothermal stability and catalytic performance of Cu-SSZ-13 in NH3-SCR was then comparatively investigated. The results indicate that the Cu-SSZ-13 zeolites prepared by various methods are also rather different in the content of paired Al and active Cu2+-2Al species, following the order of SZ-F > SZ-S > SZ-YC > SZ-XC; a positive correlation is observed between the catalytic activity in NH3-SCR and the content of α-Cu2+-2Al species determined by the electron spinning resonance. In particular, the Cu-SSZ-13 zeolite prepared by using fluoride as an assistant (Cu-SZ-F) has much higher fraction of paired Al and active α-Cu2+-2Al species and thereby exhibits better catalytic performance in NH3-SCR, with an NO conversion of nearly 80% at 200 °C under a gaseous hourly space velocity (GHSV) of 240,000 h−1. Moreover, the Cu-SSZ-13 zeolite prepared by the fluoride assistance method also displays less silanol defects and greater hydrothermal stability, showing enormous potential as a practicable catalyst of low cost in the elimination of NOx by NH3-SCR.

Influence of Fe–Cu-SSZ-13 and hybrid Fe–Cu-SSZ-13 zeolite catalyst in ammonia-selective catalytic reduction (NH3-SCR) of NOx

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx

High Activity and Wide Temperature Window of Fe‐Cu‐SSZ‐13 in the Selective Catalytic Reduction of NO with Ammonia

Enhancing performance of Fe-SSZ-13 and Cu-Fe-SSZ-13 zeolites for selective catalytic reduction reaction via post-treatment method

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Effect of Fe Addition on the Structure and SCR Reactivity of One-Pot Synthesized Cu-SSZ-13

Effects of Cu species in Cu-SSZ-13 zeolites on the performance of NO x reduction reactions

On the performance of Fe-Cu-ZSM-5 catalyst for the selective catalytic reduction of NO with NH3: the influence of preparation method

A comparison of Al-rich Cu-SSZ-13 zeolites synthesized by different methods in their Al distribution, hydrothermal stability and catalytic performance in the selective catalytic reduction of NOx with NH3

Performance of Fe-ZSM-5 for Selective Catalytic Reduction of NO X with NH 3 : Effect of the Atmosphere During the Preparation of Catalysts

Development of SSZ-13 Based Sulfur Resistant NH 3 -SCR Catalysts

Self-synthesis and performance analysis of a Cu-Fe composite ZSM-5 zeolitic catalyst for NOx reduction and particulate matter removal using NH3 SCR

Unraveling the NH3-SCR-DeNOx Mechanism of Cu-SSZ-13 Variants by Spectroscopic and Transient Techniques

Catalytic Activity of Cu–SSZ-13 Prepared with Different Methods for NH3-SCR Reaction

Strong metal oxide-zeolite interactions during selective catalytic reduction of nitrogen oxides

The Comparative Study of Reaction Mechanisms and Catalytic Performances of Cu–SSZ-13 and Fe–SSZ-13 for the NH3-SCR Reaction

Effect of Fe2O3 on ZrTiO4 Support for NH3-SCR Catalytic Performance

Micro-structured Cu-ZSM-5 catalyst on aluminum microfibers for selective catalytic reduction of NO by ammonia

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Improvement of Catalytic Activity over Cu-Fe Modified Al-Rich Beta Catalyst for the Selective Catalytic Reduction of Nox with Nh3

A Study on Chemisorbed Oxygen and Reaction Process of Fe–CuOx/ZSM-5 Via Ultrasonic Impregnation Method for Low-Temperature NH3-SCR