Abstract:Selective catalytic reduction (SCR) is a crucial technique for mitigating nitrogen oxides emission of internal combustion engines. Compared with vanadium-based catalysts, copper-based molecular sieve catalysts exhibit superior low-temperature catalytic performance and anti-aging properties. The catalytic characteristics of Cu-SSZ-13 catalyst in both fresh and aged states are investigated through experimental and numerical simulations. The catalytic performance of Cu-SSZ-13 catalyst with 200 g/L coating is investigated under wide inlet temperatures (180 °C–450 °C) and ANR (ammonia to nitrogen ratio) (1–1.4) conditions via an engine emission test device. Further, the apparatus is adopted to evaluate performance at various aging temperatures (600 °C, 700 °C, and 800 °C). The aging factor is introduced based on experimental results to establish and correct the kinetic model for SCR aging state. The results illuminate that the increase of ANR fails to compensate for decline of catalytic efficiency under low-temperature conditions (150 °C).The generated quantity of isocyanate acid through the side reaction of urea hydrolysis increases proportionally with ANR. And it increased supply only resulted in a marginal 1 %–3 % improvement of catalytic efficiency. As SV decreases from 60,000 h −1 to 35,000 h −1 , the catalyst efficiency increases from 22 % to 45 %, resulting in an elevation of reactant concentration and its gradient on the catalyst surface. This leads to accelerated reaction rates and enhanced diffusion effects. The catalytic efficiency can be significantly enhanced at low temperatures when NO 2 fraction in NOx falls within the range of 10 %–25 %. The sensitivity of SCR reactions to aging varies at low temperatures (<250 °C) due to the distinct reaction sites on catalyst for different types of SCR reactions. The NO 2 SCR reactions exhibit minimal susceptibility, while the rapid SCR reactions are significantly impeded. Moreover, it has been observed that the catalyst microstructure was completely deteriorated under hydrothermal aging test at 900 °C operating condition. In general, the low-temperature catalytic performance of Cu-SSZ-13 catalyst can be further optimized by pretreating inlet gas components and optimizing the catalyst structure.

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Characterization of commercial Cu-SSZ-13 and Cu-SAPO-34 catalysts with hydrothermal treatment for NH3-SCR of NOx in diesel exhaust

Enhancement of SO2 Resistance and Hydrothermal Stability of Cu-SAPO-34 Via Al2O3 Coating for NOx Selective Catalytic Reduction with NH3 in Diesel Exhaust

Optimization of Isolated Copper Species on the NH3-SCR Performance over Cu/SSZ-39 Modified by Ammonia Water

The Cu Migration of Cu-SAPO-34 Catalyst for Ammonia Selective Catalytic Reduction of NOx During High Temperature Hydrothermal Aging Treatment

Understanding the influence of hydrothermal treatment on NH3-SCR of NO activity over Cu -SSZ-16

In situ DRIFTS and temperature-programmed technology study on NH3-SCR of NOx over Cu-SSZ-13 and Cu-SAPO-34 catalysts

Enhanced hydrothermal stability of Cu-SSZ-13 by compositing with Cu-SAPO-34 in selective catalytic reduction of nitrogen oxides with ammonia

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

Interface Induced by Hydrothermal Aging Boosts the Low-Temperature Activity of Cu-SSZ-13 for Selective Catalytic Reduction of NOx

Effects of Cu Species in Cu-SSZ-13 Zeolites on the Performance of NOx Reduction Reactions

Effect of Copper Precursors on the Activity and Hydrothermal Stability of CuII−SSZ−13 NH3−SCR Catalysts

Effects of Cu species in Cu-SSZ-13 zeolites on the performance of NO x reduction reactions

Influence of aging on in situ hydrothermally synthesized Cu-SSZ-13 catalyst for NH3-SCR reaction

Promoting effect of Ce and Mn addition on Cu-SSZ-39 zeolites for NH3-SCR reaction: Activity, hydrothermal stability, and mechanism study

Experimental and numerical study of Cu-SSZ-13 SCR system for NOx reduction and hydrothermal aging under diesel exhaust conditions

Steam and Alkali Resistant Cu-SSZ-13 Catalyst for the Selective Catalytic Reduction of NOx in Diesel Exhaust

Synthesis and evaluation of mesopore structured ZSM-5 and a CuZSM-5 catalyst for NH3-SCR reaction: Studies of simulated exhaust and engine bench testing

Spectroscopic Identification and Catalytic Relevance of NH4+ Intermediates in Selective NOx Reduction over Cu-SSZ-13 Zeolites.

Mechanistic Insights into the Promotion of Low-Temperature NH3-SCR Catalysis by Copper Auto-Reduction in Cu-zeolites

Excellent NH3-SCR Activity and Significant Sulfur Resistance over Novel Core–shell Cu-SSZ-13@meso-CeO2 Catalyst