Abstract:Selective catalytic reduction (SCR) systems are important technical means of mitigating NOx emissions for diesel engines. The major challenge of this technique is to improve the low-temperature activity of the catalyst during engine cold start and the thermal stability on repeated exposure to high-temperature exhaust. A two-stage SCR system with a Cu-SSZ-13 catalyst was analyzed with SCR sample experiments and NH3 oxidation experiments. The effects of copper content, doping metals, structural arrangement, NO2/NOx ratio, and NH3/NOx ratio (ANR) on the NOx conversion reaction at different temperatures were investigated. Furthermore, the Cu-SSZ-13 catalyst activity was characterized by Fourier transform infrared spectroscopy, H2 temperature-programmed reduction, and X-ray diffraction. The results showed that the low-temperature catalytic performance first increased with increasing copper content and decreased with a further increase. The optimal value of copper content was around 3.4%. The thermal stability of Cu-SSZ-13 catalysts decreased with the increase in the copper content. The temperature window of the high NOx conversion rate was widened by doping Zr/Mn/Ce, and the temperature window was widened by 15.1–33.1%. The two-stage SCR system was compared with a single SCR, which showed that the NH3 oxidation rate increased by 46.9–88.7%, the NOx conversion rate increased by 67.7–85.5%, and T90 was optimized by 3.3–13.5% during engine cold start. This made the total NOx conversion rate to maintain a high level above 80% at temperatures over 500 °C. An appropriate NO2/NOx ratio and ANR could improve the NOx conversion rate at a low-temperature range.

Selective Catalytic Reduction of NOx with Ammonia over Copper Ion Exchanged SAPO‐47 Zeolites in a Wide Temperature Range

Cu-SAPO-17: A novel catalyst for selective catalytic reduction of NO

Cu-SAPO-56, a potential catalyst for the selective catalytic reduction of NOx by NH3

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx

Controlled synthesis of Cu-based SAPO-18/34 intergrowth zeolites for selective catalytic reduction of NOx by ammonia

Selective Catalytic Reduction of NOx with NH3: Opportunities and Challenges of Cu-based Small-Pore Zeolites

Selective catalytic reduction of NO x with NH3: opportunities and challenges of Cu-based small-pore zeolites

Migration, Reactivity, and Sulfur Tolerance of Copper Species in SAPO-34 Zeolite Toward NOx Reduction with Ammonia

Copper-exchanged SUZ-4 zeolite catalysts for selective catalytic reduction of NOx

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Location and Nature of Cu Species in Cu/SAPO-34 for Selective Catalytic Reduction of NO with NH3

Cu-Exchanged CHA-Type Zeolite from Organic Template-Free Synthesis: an Effective Catalyst for NH3-SCR

Insights into Synergy of Copper and Acid Sites for Selective Catalytic Reduction of NO with Ammonia over Zeolite Catalysts

High Activity and Wide Temperature Window of Fe‐Cu‐SSZ‐13 in the Selective Catalytic Reduction of NO with Ammonia

Insight into solid-state ion-exchanged Cu-based zeolite (SSZ-13, SAPO-18, and SAPO-34) catalysts for the NH3-SCR reaction: The promoting role of NH4-form zeolite substrates

Low-Cost CuX Catalyst from Blast Furnace Slag Waste for Low-Temperature NH 3 -SCR: Nature of Cu Active Sites and Influence of SO 2 /H 2 O

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

Zeolite-Like Ion-Exchanged Cu-Attapulgite Catalysts for Promoted Selective Oxidation of Ammonia

Selective Catalytic Reduction of NOx by NH3 over Cu-AEI Zeolite Catalyst: Current Status and Future Perspectives

Redistributing Cu species in Cu-SSZ-13 zeolite as NH3-SCR catalyst via a simple ion-exchange

Effects of Catalyst Physicochemical Properties on the Catalytic Activity of Cu Zeolite Selective Catalytic Reduction at Different Inlet Gas Conditions