Abstract:Ammonia-selective catalytic oxidation (NH3-SCO) is an effective technology to solve the problem of ammonia leakage from diesel vehicles, while ammonia oxidation catalysts (AOC) still suffer from insufficient low-temperature activity and poor nitrogen selectivity. Herein, we prepared a bifunctional Pt/Cu-SSZ-13 catalyst containing an SCO component (Pt) and a selective catalytic reduction (SCR) component (Cu). This bifunctional catalyst exhibited excellent catalytic performance during NH3 oxidation under practical conditions containing water vapor, achieving >85% N2 selectivity over the whole temperature range. Catalysts were systematically characterized by Brunauer–Emmett–Teller, X-ray diffraction, inductively coupled plasma optical emission spectrometry, X-ray photoelectron spectroscopy, H2 temperature-programmed reduction, NH3 temperature-programmed desorption, high-angle annular dark-field scanning transmission electron microscopy, and X-ray absorption fine structure analysis. The results showed that metallic Pt nanoparticles were mainly present on the exterior surface of the Pt/Cu-SSZ-13 zeolite catalyst, while dispersed Cu2+ cations were present in the interior of the zeolite. Based on operando diffuse reflectance infrared Fourier transform spectroscopy with mass spectrometry experiments, it was confirmed that on Pt/SSZ-13, over-oxidation of NH3 produced large amounts of N2O and NO x at low and high temperatures, respectively, resulting in a poor N2 selectivity. With Cu present, in contrast, the byproduct (NO) would further react with adsorbed NH3 on Cu Lewis acid sites to produce N2 by a tandem SCR reaction, thus contributing to the superior N2 selectivity of the Pt/Cu-SSZ-13 bifunctional catalyst.

High Activity and Wide Temperature Window of Fe‐Cu‐SSZ‐13 in the Selective Catalytic Reduction of NO with Ammonia

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Effect of Fe Addition on the Structure and SCR Reactivity of One-Pot Synthesized Cu-SSZ-13

Influence of Fe–Cu-SSZ-13 and hybrid Fe–Cu-SSZ-13 zeolite catalyst in ammonia-selective catalytic reduction (NH3-SCR) of NOx

Selective Catalytic Reduction of NOx with NH3 over Short-Range Ordered W-O-Fe Structures with High Thermal Stability

The Comparative Study of Reaction Mechanisms and Catalytic Performances of Cu–SSZ-13 and Fe–SSZ-13 for the NH3-SCR Reaction

Excellent Performance of One-Pot Synthesized Cu-SSZ-13 Catalyst for the Selective Catalytic Reduction of NOx with NH3

Identification of Active Sites and Reaction Mechanism on Low-Temperature SCR Activity over Cu-SSZ-13 Catalysts Prepared by Different Methods

A New Insight into Active Cu2+ Species Properties in One‐Pot Synthesized Cu‐SSZ‐13 Catalysts for NOx Reduction by NH3

Improvement of Catalytic Activity over Cu-Fe Modified Al-Rich Beta Catalyst for the Selective Catalytic Reduction of Nox with Nh3

MnOx-CeO2 Supported on Cu-SSZ-13: A Novel SCR Catalyst in a Wide Temperature Range

Enhancing performance of Fe-SSZ-13 and Cu-Fe-SSZ-13 zeolites for selective catalytic reduction reaction via post-treatment method

Basic understanding of Cu‐SSZ‐13 in catalyzing low‐temperature selective catalytic reduction of NOx by ammonia

On the performance of Fe-Cu-ZSM-5 catalyst for the selective catalytic reduction of NO with NH3: the influence of preparation method

Designing a Bifunctional Pt/Cu-SSZ-13 Catalyst for Ammonia-Selective Catalytic Oxidation with Superior Selectivity

Experimental and Density Functional Theory Studies on the Zeolite-Based Fe–Ni–W Trimetallic Catalyst for High-Temperature NOx Selective Catalytic Reduction: Identification of Active Sites Suppressing Ammonia Over-oxidation

Interface Induced by Hydrothermal Aging Boosts the Low-Temperature Activity of Cu-SSZ-13 for Selective Catalytic Reduction of NOx

High-performance Fe-Cu composite oxide for selective catalytic reduction of NO with NH3: Driving of Cu on α-Fe2O3

A study on chemisorbed oxygen and reaction process of Fe–CuO x /ZSM-5 via ultrasonic impregnation method for low-temperature NH 3 -SCR

Excellent Activity and Selectivity of One-Pot Synthesized Cu-SSZ-13 Catalyst in the Selective Catalytic Oxidation of Ammonia to Nitrogen.