Abstract:A series of Ti-Nb binary oxide were synthesized by co-precipitation as supports to prepare Cu/Ti-Nb mixed oxide catalysts through wetness impregnation. The novel catalyst 0.8%Cu/Ti2NbOx exhibited an excellent catalytic activity and N-2 selectivity with a broad operation temperature (250-425 degrees C) under a gas hourly space velocity (GHSV) of 177,000 h(-1) for the selective catalytic reduction of NOx with NH3. A series of analytical techniques including high resolution transmission electron microscopy (HRTEM), N-2-physisorption, X-ray diffraction (XRD), Laser Raman spectra (LRS), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), NH3 temperature-programmed desorption (NH3-TPD), H-2 temperature-programmed reduction (H-2-TPR) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to investigate the correlations among catalyst structure, surface properties and catalytic performance. For the support Ti2NbOx, the specific surface area was larger than that of TiO2, promoting the high dispersion of the active component. Also, the surface acid sites were increased by addition of niobium oxide species and the redox capability of the support was enhanced by doping copper species. Moreover, the introduction of copper species effectively enhanced the catalytic performance within 225-400 degrees C. The copper species mainly existed as isolated Cu2+ and non-isolated Cu2+ and the isolated Cue(2+) ions played a significant role in the high NH3-SCR performance over 0.8%Cu/Ti2NbOx catalyst. Hydrothermal aging treatment experiment demonstrated that 0.8%Cu/Ti2NbOx catalyst had an excellent hydrothermal stability. In addition, water vapor or/and SO2 had a slightly reversible inhibition influence on the catalytic performance over 0.8%Cu/Ti2NbOx, indicating that it was a promising candidate for NH3-SCR catalyst in the future practical application. The reaction pathway over 0.8%Cu/Ti2NbOx catalyst followed both Eley-Rideal mechanism and Langmuir-Hinshelwood mechanism at 225 degrees C. (C) 2017 Elsevier B.V. All rights reserved.

Improvement of Catalytic Activity over Cu-Fe Modified Al-Rich Beta Catalyst for the Selective Catalytic Reduction of Nox with Nh3

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

Enhancement of Low-Temperature Activity over Cu-exchanged Zeolite Beta from Organotemplate-Free Synthesis for the Selective Catalytic Reduction of NOx with NH3 in Exhaust Gas Streams

Fe-Beta Zeolite for Selective Catalytic Reduction of Nox with Nh3: Influence of Fe Content

High Activity and Wide Temperature Window of Fe‐Cu‐SSZ‐13 in the Selective Catalytic Reduction of NO with Ammonia

Simultaneous Selective Catalytic Reduction of NO and N2O by NH3 over Fe-Zeolite Catalysts

Iron Oxide-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOxwith NH3

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Ce enhanced low-temperature performance of Mn modified Cu-Beta zeolite catalyst for NH 3 -SCR

Ce Enhanced Low-Temperature Performance of Mn Modified Cu-Beta Zeolite Catalyst for NH3-SCR

Influence of Fe–Cu-SSZ-13 and hybrid Fe–Cu-SSZ-13 zeolite catalyst in ammonia-selective catalytic reduction (NH3-SCR) of NOx

Fe-Mn/Al2O3 Catalysts for Low Temperature Selective Catalytic Reduction of NO with NH3

Fe-doped Beta zeolite from organotemplate-free synthesis for NH3-SCR of NOx

Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Fe–Mn Mixed-Oxide Catalysts Containing Fe3Mn3O8 Phase

Iron oxide-based catalysts for low-temperature selective catalytic reduction of NOx with NH3

Effect of Fe Addition on the Structure and SCR Reactivity of One-Pot Synthesized Cu-SSZ-13

Promotional Synergistic Effect of Cu and Nb Doping on a Novel Cu/Ti-Nb Ternary Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

Reaction Pathways of Standard and Fast Selective Catalytic Reduction over Cu-SSZ-39

Low temperature SCR denitration with NH3 by highly dispersed Ni–Cu Sites: An insight into surface acidity and redox ability

Effects of Catalyst Physicochemical Properties on the Catalytic Activity of Cu Zeolite Selective Catalytic Reduction at Different Inlet Gas Conditions