Abstract:Cu-SSZ-13 and Zr-modified Cu-SSZ-13 catalysts with different Zr/Cu mass ratios were prepared by ion-exchange and impregnation methods, respectively. The NH3-SCR performance tests were performed using the catalyst performance evaluation device to investigate the effects of different Zr/Cu mass ratios on the catalyst ammonia-selective catalytic reduction (NH3-SCR) performance. X-ray diffraction, ICP-OES, BET, NH3 temperature-programed desorption (NH3-TPD), H2 temperature-programmed reduction (H2-TPR), X-ray photoelectron spectrometry, and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to characterize the catalysts. The results show that the prepared Cu-SSZ-13 catalyst had good catalytic activity. Zr introduction was carried out on this basis. The results showed that proper Zr doping improved the catalytic activity at low temperatures and widened the high-temperature stage, with an optimal activity stage at a Zr/Cu mass ratio of 0.2. The NO x conversion efficiency was close to 100% at 200 °C and over 80% at 450 °C. The active species were well dispersed on the catalyst surface, and the metal modification did not change the crystal structure of the zeolite. The NH3-TPD results showed that the Zr-modified catalyst had more abundant acid sites, and the H2-TPR results indicated that the Cu species on the catalyst had excellent reducibility at low temperatures. The interaction between Cu and Zr could regulate the Cu+ and Cu2+ proportion on the catalyst surface, which facilitated the increase in the Cu+ for fast SCR reaction at low temperatures. With abundant acid sites and both SCR reactions following the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) mechanism on the catalyst surface at a low temperature of 150 °C, more abundant acid sites and reaction paths created favorable conditions for NH3-SCR reactions at low temperatures.

Effect of Fe Addition on the Structure and SCR Reactivity of One-Pot Synthesized Cu-SSZ-13

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Boosted Denitration Activity of Α-Fe2o3 for Low-Temperature NH3-SCR by Addition of Ce/Cu

High Activity and Wide Temperature Window of Fe‐Cu‐SSZ‐13 in the Selective Catalytic Reduction of NO with Ammonia

The Comparative Study of Reaction Mechanisms and Catalytic Performances of Cu–SSZ-13 and Fe–SSZ-13 for the NH3-SCR Reaction

Influence of Fe–Cu-SSZ-13 and hybrid Fe–Cu-SSZ-13 zeolite catalyst in ammonia-selective catalytic reduction (NH3-SCR) of NOx

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx

Promoting effect of Cu and Mn doping on the Fe/ZSM-5 catalyst for selective catalytic reduction of NO with NH 3

Identification of Active Sites and Reaction Mechanism on Low-Temperature SCR Activity over Cu-SSZ-13 Catalysts Prepared by Different Methods

Effects of Catalyst Physicochemical Properties on the Catalytic Activity of Cu Zeolite Selective Catalytic Reduction at Different Inlet Gas Conditions

Enhancing performance of Fe-SSZ-13 and Cu-Fe-SSZ-13 zeolites for selective catalytic reduction reaction via post-treatment method

Mechanistic Insights into the Enhanced Low-Temperature Activity of Cu-SSZ-13 by MnOx-CeO2 Modification for Standard SCR Reaction and Fast SCR Reactions

Study on the Performance of the Zr-Modified Cu-SSZ-13 Catalyst for Low-Temperature NH3-SCR

Effect of Fe2O3 on ZrTiO4 Support for NH3-SCR Catalytic Performance

Excellent Performance of One-Pot Synthesized Cu-SSZ-13 Catalyst for the Selective Catalytic Reduction of NOx with NH3

Influence of calcination temperature on the evolution of Fe species over Fe-SSZ-13 catalyst for the NH3-SCR of NO

Mechanistic Insights into the Cobalt Promotion on Low-Temperature NH3-SCR Reactivity of Cu/SSZ-13

Effect of iron loading on the performance and structure of Fe/ZSM-5 catalyst for the selective catalytic reduction of NO with NH3

Basic understanding of Cu‐SSZ‐13 in catalyzing low‐temperature selective catalytic reduction of NOx by ammonia

Promoting Effect of Mn on In Situ Synthesized Cu-SSZ-13 for NH3-SCR