Abstract:Hitherto, sulfur poisoning and hydrothermal aging have still been the challenges faced in practical applications of the Cu-SSZ-13 catalyst for the selective catalytic reduction (SCR) of NOx from diesel engine exhaust. Here, we elaborately design and conduct an in-depth investigation of the synthetic effects of hydrothermal aging and SO2 poisoning on pristine Cu-SSZ-13 and Cu-SSZ-13@Ce0.75Zr0.25O2 core@shell structure catalysts (Cu@CZ). It has been discovered that Cu@CZ susceptible to 750 °C with 5 vol % H2O followed by 200 ppm SO2 with 5 vol % H2O (Cu@CZ-A-S) could still maintain nearly 100% NOx conversion across the significantly wider temperature region of 200-425 °C, which is remarkably broader than that of the Cu-SSZ-13-A-S (300-400 °C) counterpart. The experimental results show that the hydrothermal aging process results in the migration of highly active Cu species within the cage of Cu-SSZ-13 to the CZ surface, forming CuO/CZ with abundant interfaces, which significantly enhances the adsorption and subsequent activation of NO, leading to the generation of reactive N2O3 and HONO intermediates. Moreover, density functional theory (DFT) calculations reveal that the H of the HONO* species can function as Brønsted acid sites, effectively adsorbing NH3 to generate the active NH4NO2* intermediate, which readily decomposes into N2 and H2O. Furthermore, this pathway is the rate-determining step with an energy barrier of 0.93 eV, notably lower than that of the "standard SCR" pathway (1.42 eV). Therefore, the formation of the new CuO/CZ interface profoundly boosts the low-temperature NH3-SCR activity and improves the coresistance of the Cu@CZ catalyst to sulfur poisoning and hydrothermal aging.

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

Effect of Fe Addition on the Structure and SCR Reactivity of One-Pot Synthesized Cu-SSZ-13

High Activity and Wide Temperature Window of Fe‐Cu‐SSZ‐13 in the Selective Catalytic Reduction of NO with Ammonia

Excellent Performance of One-Pot Synthesized Cu-SSZ-13 Catalyst for the Selective Catalytic Reduction of NOx with NH3

A New Insight into Active Cu2+ Species Properties in One‐Pot Synthesized Cu‐SSZ‐13 Catalysts for NOx Reduction by NH3

In-situ One-Pot Synthesis of Ti/Cu-SSZ-13 Catalysts with Highly Efficient NH3-SCR Catalytic Performance as Well as Superior H2O/SO2 Tolerability

Influence of Fe–Cu-SSZ-13 and hybrid Fe–Cu-SSZ-13 zeolite catalyst in ammonia-selective catalytic reduction (NH3-SCR) of NOx

Design, Synthesis, and Insights into the Redox Mechanism of Highly Efficient One-Pot Cu-ZSM-5 Catalysts for the Reduction of NO x by NH 3 -SCR at Low Temperatures

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx

Excellent Activity and Selectivity of One-Pot Synthesized Cu-SSZ-13 Catalyst in the Selective Catalytic Oxidation of Ammonia to Nitrogen.

Strong metal oxide-zeolite interactions during selective catalytic reduction of nitrogen oxides

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

Toward rational design of a novel hierarchical porous Cu-SSZ-13 catalyst with boosted low-temperature NO reduction performance

Promoting effect of Cu and Mn doping on the Fe/ZSM-5 catalyst for selective catalytic reduction of NO with NH 3

Self-synthesis and performance analysis of a Cu-Fe composite ZSM-5 zeolitic catalyst for NOx reduction and particulate matter removal using NH3 SCR

Enhancing performance of Fe-SSZ-13 and Cu-Fe-SSZ-13 zeolites for selective catalytic reduction reaction via post-treatment method

Interface Induced by Hydrothermal Aging Boosts the Low-Temperature Activity of Cu-SSZ-13 for Selective Catalytic Reduction of NOx

Understanding enhancement of strong Copper-Yttrium interactions on catalytic properties of Cu/Y-SSZ-13 for NH 3 -SCR

Improvement of Catalytic Activity over Cu-Fe Modified Al-Rich Beta Catalyst for the Selective Catalytic Reduction of Nox with Nh3

On the performance of Fe-Cu-ZSM-5 catalyst for the selective catalytic reduction of NO with NH3: the influence of preparation method