Abstract:Selective catalytic NH3-to-N2 oxidation (NH3-SCO) is highly promising for abating NH3 emissions slipped from stationary flue gas after-treatment devices. Its practical application, however, is limited by the non-availability of low-cost catalysts with high activity and N2 selectivity. Here, using defect-rich nitrogen-doped carbon nanotubes (NCNT-AW) as the support, we developed a highly active and durable copper-based NH3-SCO catalyst with a high abundance of cuprous (Cu+) sites. The obtained Cu/NCNT-AW catalyst demonstrated outstanding activity with a T50 (i.e. the temperature to reach 50% NH3 conversion) of 174°C in the NH3-SCO reaction, which outperformed not only the Cu catalyst supported on N-free O-functionalized CNTs (OCNTs) or NCNT with less surface defects, but also those most active Cu catalysts in open literature. Reaction kinetics measurements and temperature-programmed surface reactions using NH3 as a probe molecule revealed that the NH3-SCO reaction on Cu/NCNT-AW follows an internal selective catalytic reaction (i-SCR) route involving nitric oxide (NO) as a key intermediate. According to mechanistic investigations by X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray absorption spectroscopy, the superior NH3-SCO performance of Cu/NCNT-AW originated from a synergy of surface defects and N-dopants. Specifically, surface defects promoted the anchoring of CuO nanoparticles on N-containing sites and, thereby, enabled efficient electron transfer from N to CuO, increasing significantly the fraction of SCR-active Cu+ sites in the catalyst. This study puts forward a new idea for manipulating and utilizing the interplay of defects and N-dopants on carbon surfaces to fabricate Cu+-rich Cu catalysts for efficient abatement of slip NH3 emissions via selective oxidation.

Excellent Activity and Selectivity of One-Pot Synthesized Cu-SSZ-13 Catalyst in the Selective Catalytic Oxidation of Ammonia to Nitrogen.

Designing a Bifunctional Pt/Cu-SSZ-13 Catalyst for Ammonia-Selective Catalytic Oxidation with Superior Selectivity

Excellent Performance of One-Pot Synthesized Cu-SSZ-13 Catalyst for the Selective Catalytic Reduction of NOx with NH3

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx

A New Insight into Active Cu2+ Species Properties in One‐Pot Synthesized Cu‐SSZ‐13 Catalysts for NOx Reduction by NH3

High Activity and Wide Temperature Window of Fe‐Cu‐SSZ‐13 in the Selective Catalytic Reduction of NO with Ammonia

Zeolite-Like Ion-Exchanged Cu-Attapulgite Catalysts for Promoted Selective Oxidation of Ammonia

In Situ Loading of Cu2O Active Sites on Island-like Copper for Efficient Electrochemical Reduction of Nitrate to Ammonia.

In-situ One-Pot Synthesis of Ti/Cu-SSZ-13 Catalysts with Highly Efficient NH3-SCR Catalytic Performance as Well as Superior H2O/SO2 Tolerability

Ammonia Abatement via Selective Oxidation over Electron-Deficient Copper Catalysts

Identification of Active Sites and Reaction Mechanism on Low-Temperature SCR Activity over Cu-SSZ-13 Catalysts Prepared by Different Methods

Design, Synthesis, and Insights into the Redox Mechanism of Highly Efficient One-Pot Cu-ZSM-5 Catalysts for the Reduction of NO x by NH 3 -SCR at Low Temperatures

Toward rational design of a novel hierarchical porous Cu-SSZ-13 catalyst with boosted low-temperature NO reduction performance

Synthesis of TixSn1-xO2 mixed metal oxide for copper catalysts as high-efficiency NH3 selective catalytic oxidation

Promoting effect of Cu as electron transfer medium on NH3-SCO reaction in asymmetric Ag-Ov-Ti-Sm-Cu ring active site

Engineering a PtCu Alloy to Improve N 2 Selectivity of NH 3 -SCO over the Pt/SSZ-13 Catalyst

Effects of Cu species in Cu-SSZ-13 zeolites on the performance of NO x reduction reactions

Designed Copper-Amine Complex As an Efficient Template for One-Pot Synthesis of Cu-Ssz-13 Zeolite with Excellent Activity for Selective Catalytic Reduction of Nox by Nh3

Structure, Acidity and Activity of CuOx/WOx–ZrO2 Catalyst for Selective Catalytic Reduction of NO by NH3

Low-temperature NH3 abatement via selective oxidation over a supported copper catalyst with high Cu+ abundance