Abstract:The removal of ammonia (NH3) is a very important environment issue because NH3 gas is harmful to human health and environment. The selective catalytic oxidation (SCO) of NH3 to nitrogen (N-2) is one of the most effective technologies, and has attracted intensity attention in recent years. Various types of materials have been reported as catalysts for ammonia SCO reaction over the past few years, including supported noble metals (Pt, Pd, Ru, Au, Ir, Ag, etc.), supported transition-metal oxides (Fe, Co, Mn, V, Ni, Cu, etc.), and modified zeolites (ZSM-5, MCM-41, SSZ-13. SAPO-34, etc.). Each type of catalysts has both advantages and disadvantages. Noble metals show the high activity at low temperature, while deeper oxidation of NH3 to nitrogen oxides and high cost limit their widespread use. Transition-metal oxides and modified zeolites catalysts show higher N-2 selectivity. however, need higher operation temperatures than noble metal catalysts. The Ag-based catalyst depends on the particle size and valence state of Ag species for the NH3-SCO activity and N-2 selective. Therefore, much effort has been devoted to alter the particle size and valence state of Ag species, such as the support, modification/doping, atmosphere (H-2 or O-2) pretreatment, et al. The Cu-based catalyst mainly include supported catalysts and composite oxide catalysts. The activity and selectivity of Cu-based catalysts are mainly influenced by the Cu loading, different precursors, the preparation method and calcination temperatures, which are decisive to control the texture features and dispersion states of CuO species. Nowadays, three major mechanisms have been investigated and reported: (1) The imide mechanism. (2) the hydrazine mechanism, and (3) the internal selective catalytic reduction (i-SCR) mechanism. The NH3-SCO mechanisms over Ag and Cu based catalysts also follows the i-SCR mechanisms. The concept of bifunctional catalysts is based on the iSCR mechanism of NH3-SCO, such as Pt-Al2O3 + Fe/Cu-zeolite catalyst. Finally, we look forward to the future research direction and development trend. The focus of future research is to modify the support of Ag-based catalysts so that they have a better ability to disperse Ag. At the same time, the ratio of Ag-0 to silver oxide should be adjusted to make it have better catalytic activity and N-2 selectivity. For Cu catalysts, through element doping, carrier modification and the formation of composite oxide catalysts with special structures, their catalytic activity and N-2 selectivity are further improved. It is coupled with the NH3-SCR reaction to solve the NH3 slip, such as NH3-SCR device of the diesel engine. The hydrothermal stability of catalyst and the real atmosphere (SO2, CO2, H2O, NO, etc.) should be considered in the NH3-SCO reaction. The SCO will be an importantly potential technique for the removal of NH3 in the exhaust gas in the near future.

Ammonia Abatement via Selective Oxidation over Electron-Deficient Copper Catalysts

Low-temperature NH3 abatement via selective oxidation over a supported copper catalyst with high Cu+ abundance

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Progress in selective catalytic oxidation of ammonia to nitrogen

Progress on selective catalytic oxidation of ammonia (NH 3 ‐SCO) over Ag-based catalysts

Designing a Bifunctional Pt/Cu-SSZ-13 Catalyst for Ammonia-Selective Catalytic Oxidation with Superior Selectivity

Promoting effect of Cu as electron transfer medium on NH3-SCO reaction in asymmetric Ag-Ov-Ti-Sm-Cu ring active site

Unraveling the Mechanistic Origin of High N2 Selectivity in Ammonia Selective Catalytic Oxidation on CuO-Based Catalyst

Selective Catalytic Oxidation of Ammonia to Nitrogen over CuO-CeO2 Mixed Oxides Prepared by Surfactant-Templated Method

Zeolite-Like Ion-Exchanged Cu-Attapulgite Catalysts for Promoted Selective Oxidation of Ammonia

Efficient Cu-Co Dual-Site Promotes Selective Catalytic Oxidation of Ammonia over Cobalt Based Catalysts

Designing ammonia oxidation catalysts via physical mixing of Pt/SiO2 and Cu/ZSM-5

Advances in selective catalytic oxidation of ammonia (NH3-SCO): A review of catalyst structure-activity relationship and design principles

Rationally engineered ReO<sub>x</sub>-CuSO<sub>4</sub>/TiO<sub>2</sub> catalyst with superior NH<sub>3</sub>-SCO efficiency and remarkably boosted SO<sub>2</sub> tolerance: Synergy of acid sites and surface adsorbed oxygen

Structural Properties of PtCuO/Al2O3 surface catalyst for selective NH3 oxidation using operando spectroscopy

Synergistic Effect over CeSnOx Catalyst for the Selective Catalytic Oxidation of NH3

Progress of Ammonia Selective Catalytic Oxidation Research and Performance Improvement Strategy

Formation of Highly Active Superoxide Sites on CuO Nanoclusters Encapsulated in SAPO-34 for Catalytic Selective Ammonia Oxidation

Mixed Catalyst SmMn2O5/Cu-SAPO34 for NH3-Selective Catalytic Oxidation

The Unique CO Activation Effects for Boosting NH3 Selective Catalytic Oxidation over CuOx-CeO2.

Synergistic Effect over CeSnO x Catalyst for the Selective Catalytic Oxidation of NH 3