Abstract:Selective catalytic NH3-to-N2 oxidation (NH3-SCO) is highly promising for abating NH3 emissions slipped from stationary flue gas after-treatment devices. Its practical application, however, is limited by the non-availability of low-cost catalysts with high activity and N2 selectivity. Here, using defect-rich nitrogen-doped carbon nanotubes (NCNT-AW) as the support, we developed a highly active and durable copper-based NH3-SCO catalyst with a high abundance of cuprous (Cu+) sites. The obtained Cu/NCNT-AW catalyst demonstrated outstanding activity with a T50 (i.e. the temperature to reach 50% NH3 conversion) of 174°C in the NH3-SCO reaction, which outperformed not only the Cu catalyst supported on N-free O-functionalized CNTs (OCNTs) or NCNT with less surface defects, but also those most active Cu catalysts in open literature. Reaction kinetics measurements and temperature-programmed surface reactions using NH3 as a probe molecule revealed that the NH3-SCO reaction on Cu/NCNT-AW follows an internal selective catalytic reaction (i-SCR) route involving nitric oxide (NO) as a key intermediate. According to mechanistic investigations by X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray absorption spectroscopy, the superior NH3-SCO performance of Cu/NCNT-AW originated from a synergy of surface defects and N-dopants. Specifically, surface defects promoted the anchoring of CuO nanoparticles on N-containing sites and, thereby, enabled efficient electron transfer from N to CuO, increasing significantly the fraction of SCR-active Cu+ sites in the catalyst. This study puts forward a new idea for manipulating and utilizing the interplay of defects and N-dopants on carbon surfaces to fabricate Cu+-rich Cu catalysts for efficient abatement of slip NH3 emissions via selective oxidation.

Advances in selective catalytic oxidation of ammonia (NH3-SCO): A review of catalyst structure-activity relationship and design principles

Progress on selective catalytic oxidation of ammonia (NH 3 ‐SCO) over Ag-based catalysts

Progress of Ammonia Selective Catalytic Oxidation Research and Performance Improvement Strategy

Ammonia Abatement via Selective Oxidation over Electron-Deficient Copper Catalysts

Enhancement of Acidic Sites in Layered MnO2 for the Highly Efficient Selective Catalytic Oxidation of Gaseous Ammonia

Designing a Bifunctional Pt/Cu-SSZ-13 Catalyst for Ammonia-Selective Catalytic Oxidation with Superior Selectivity

Recent advances in selective catalytic oxidation of nitric oxide (NO-SCO) in emissions with excess oxygen: a review on catalysts and mechanisms

Influence of Catalyst Structural Remodelling on The Performance of NH3 ‐SCR Reactions: A Mini Review

Selective catalytic oxidation of ammonia over AMn2O5 (A = Sm,Y,Gd) and reaction selectivity promotion through Nb decoration

Promoting effect of Cu as electron transfer medium on NH3-SCO reaction in asymmetric Ag-Ov-Ti-Sm-Cu ring active site

Unraveling the Mechanistic Origin of High N2 Selectivity in Ammonia Selective Catalytic Oxidation on CuO-Based Catalyst

Mechanisms for Selective Catalytic Oxidation of Ammonia over Vanadium Oxides

Theory and Practice of Metal Oxide Catalyst Design for the Selective Catalytic Reduction of NOx with NH3

Theory and practice of metal oxide catalyst design for the selective catalytic reduction of NO with NH3

A Comparative Mini-Review on Transition Metal Oxides Applied for the Selective Catalytic Ammonia Oxidation (NH3-SCO)

Low-temperature NH3 abatement via selective oxidation over a supported copper catalyst with high Cu+ abundance

Review of Sulfur Promotion Effects on Metal Oxide Catalysts for NOx Emission Control

Regulating the valence and size of the active center of Co/Al2O3 catalyst improved the performance and selectivity of NH3-SCO

Review of Core-shell structure zeolite-based catalysts for NOx emission control

A Short Review of Layered Double Oxide-Based Catalysts for NH3-SCR: Synthesis and NOx Removal

Selective catalytic oxidation of ammonia to nitrogen over zeolite-supported Pt-Au catalysts: Effects of alloy formation and acid sites