Abstract:BACKGROUND Manganese‐based catalysts were considered the most promising catalysts for low‐temperature selective catalytic reduction (NH3‐SCR) reactions. In this work, a series of Mn3Fe2NbyOx catalysts were synthesized by co‐precipitation method for low‐temperature NH3‐SCR and SO2 tolerance tests. RESULTS The catalysts were characterized by BET, SEM, XRD, XPS, H2‐TPR, and NH3‐TPD. Mn3Fe2Nb0.01Ox exhibited exceptionally high activity with a conversion of almost 100% from 80°C to 240°C, and a NO conversion of more than 75% at 40°C, while the NO conversion at 140°C in the presence of 100 ppm SO2 remained above 90% for 4 h. CONCLUSION According to the characterization results, Nb modification can expand the specific surface area of the catalyst, improve the structure of the catalyst, and make the active components on the catalyst surface more dispersed. Moreover, the Nb‐modified catalyst reduced the content of Mn2+ on the catalyst surface and strengthened the electronic interactions between elements. The synergistic effects among Mn, Fe, and Nb facilitate the formation of more chemically adsorbed oxygen, which enhances the reduction capacity of the catalyst. This facilitates the adsorption of NH3 by the catalyst at low temperatures and promotes the process of low‐temperature NH3‐SCR reaction. More importantly, the Nb‐modified catalyst possessed more weak acid sites, and the higher surface acidity was conducive to the inhibition of SO3 generation, which enhanced the sulfur poisoning resistance of the catalyst. © 2024 Society of Chemical Industry (SCI).

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

New Insights into the Relationships Between Performance and Physicochemical Properties of FeOx–NbOx Mixed Oxide Catalysts for the NH3-SCR Reactions

Selective Catalytic Reduction of NOx with NH3 over Short-Range Ordered W-O-Fe Structures with High Thermal Stability

Insight into highly efficient FeOx catalysts for the selective catalytic reduction of NOx by NH3: Experimental and DFT study

Optimizing Selective Catalytic Reduction of NO with NH3 on Fe2O3/WO3 Via Redox‐Acid Synergy

Novel FeVO4 catalyst modified with NbTiOx for efficient selective catalytic reduction of NOx with NH3

Effect of Nb‐doping on the MnFeOx catalyst for NH3‐SCR reaction at low‐temperature

Modification of Mnco2ox Catalysts by Nbox for Low Temperature Selective Catalytic Reduction of No with Nh3

Highly Dispersed MnOx–FeOx Supported by Silicalite-1 for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Iron-Based Composite Oxide Catalysts Tuned by CTAB Exhibit Superior NH3–SCR Performance

Activity Enhancement of Wo3 Modified Fe2o3 Catalyst for the Selective Catalytic Reduction of Nox by Nh3

The Superior Performance of Nb-modified Cu-Ce-Ti Mixed Oxides for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

Optimization of Robust FeMnSmO x Catalyst for Low-Temperature (<150 °C) NH 3 –SCR of NO x

Bimetallic modification of MnFeO nanobelts with Nb and Nd for enhanced low-temperature de-NO performance and SO2 tolerance

Behavior and structure tuning of (Mn&Fe)AlOx-based catalysts for superior denitrification performance

Manganese–niobium Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Insights over Titanium Modified FeMgOx Catalysts for Selective Catalytic Reduction of NOx with NH3: Influence of Precursors and Crystalline Structures

Tailored temperature window of MnOx-CeO2 SCR catalyst by addition of acidic metal oxides

Synthesis of CrOx/C Catalysts for Low Temperature NH3-SCR with Enhanced Regeneration Ability in the Presence of SO2

Tunable Highly Dispersed Nia-xMnxAlOy Catalysts Derived from Layered Double Oxide for Low Temperature NOx Removal

Modification of MnCo<sub>2</sub>O<sub>x</sub> catalysts by NbO<sub>x</sub> for low temperature selective catalytic reduction of NO with NH<sub>3</sub>