Abstract:Iron oxides supported on TiO2 catalysts show good activity in selective catalytic reduction (SCR) of NOx by ammonia. In this work, Fe-2(SO4)(3)/TiO2 and other catalysts containing iron and sulfates were prepared by the impregnation method and their activities for SCR of NOx by ammonia were investigated On Fe-2(SO4)(3)/TiO2 catalyst, NOx conversion reached 98.0% in the temperature range of 350-450 degrees C, while yielding little N2O. Characterization results showed that alpha-Fe2O3 and sulfates were mainly formed on the Fe-2(SO4)(3)/TiO2 catalyst. Iron oxide catalysts with sulfates [e.g., Fe-2(SO4)(3)/TiO2] caused more dispersed iron phase, and the sulfation effect might have mostly occurred on iron oxides but not TiO2. In contrast, Fe(NO3)(3) precursor supported on TiO2 without sulfates led to the Fe2O3 particle products, which physically connected to the surface of TiO2 and resulted in some agglomerations or heterogeneous distribution of Fe2O3 particles. In addition, sulfates played an important role in the SCR reactions, which were responsible for strong Bronsted acid sites. The SCR reaction mechanism on Fe-2(SO4)(3)/TiO2 might have taken place as follows: NH3 was adsorbed onto the surface of Fe-2(SO4)(3)/TiO2 and mainly formed NH4+ on Bronsted acid sites. NO was oxidized to NO2 by the oxygen in the reaction gas or on the iron oxide sites of the catalyst. Then, nitrates originated from NO2 were generated on Fe-2(SO4)(3)/TiO2 catalyst for NH3-SCR reaction. Finally, an active intermediate species like ammonium nitrite was formed, which eventually decomposed to gaseous nitrogen.

Novel FeVO4 catalyst modified with NbTiOx for efficient selective catalytic reduction of NOx with NH3

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Selective Catalytic Reduction of NOx with NH3 over Short-Range Ordered W-O-Fe Structures with High Thermal Stability

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

Substitution of WO3in V2O5/WO3–TiO2by Fe2O3for Selective Catalytic Reduction of NO with NH3

Activation of Fast Selective Catalytic Reduction of NO by NH3 at Low Temperature over TiO2 Modified CuOX-CeOX Composites

Insight into highly efficient FeOx catalysts for the selective catalytic reduction of NOx by NH3: Experimental and DFT study

Optimizing Selective Catalytic Reduction of NO with NH3 on Fe2O3/WO3 Via Redox‐Acid Synergy

Revealing the Promotion Effects of Nb on Alkali Resistance of FeVO4/TiO2 Catalysts for NOx Reduction

Catalytic Performance, Characterization, and Mechanism Study of Fe-2(So4)(3)/Tio2 Catalyst for Selective Catalytic Reduction of Nox by Ammonia

Activity enhancement of WO3 modified FeTiO catalysts for the selective catalytic reduction of NO by NH3

TiO2-modified CeVO4 catalyst for the selective catalytic reduction of NOx with NH3

Ce1-xFexVO4 with Improved Activity for Catalytic Reduction of NO with NH3

Fabrication of wide temperature FexCe1-xVO4 modified TiO2-graphene catalyst with excellent NH3-SCR performance and strong SO2/H2O tolerance

Activity Enhancement of Wo3 Modified Fe2o3 Catalyst for the Selective Catalytic Reduction of Nox by Nh3

Iron-Based Composite Oxide Catalysts Tuned by CTAB Exhibit Superior NH3–SCR Performance

Enhancement of Low-Temperature Activity of Γ-Fe2o3-Modified V2o5-Moo3/Tio2 Catalysts for Selective Catalytic Reduction of Nox with Nh3

Selective catalytic reduction of NO with NH3 over novel iron–tungsten mixed oxide catalyst in a broad temperature range

Fe-Ti spinel for the selective catalytic reduction of NO with NH 3: Mechanism and structure-activity relationship

High-performance Fe-Cu composite oxide for selective catalytic reduction of NO with NH3: Driving of Cu on α-Fe2O3

Enhanced Catalytic Performance of V2O5–WO3/Fe2O3/TiO2microspheres for Selective Catalytic Reduction of NO by NH3