Abstract:BACKGROUND The emission of NOx can causes serious environmental pollution and endangers human health. In recent years, the selective catalytic reduction of NO with NH3 (NH3-SCR) technology has been widely studied and adopted to reduce the production and emissions of NOx during many technologies. RESULTS A series of Mn-Ce-Co-x/Ti-C,N catalysts were prepared by the impregnation method, and low-temperature NH3-SCR was studied. The results show that support modification (Ti-C,N) can broaden the operation temperature window of the catalyst (NO conversion >95%: Mn-Ce/TiO2 catalyst, 160-320 degrees C; Mn-Ce/Ti-C,N catalyst, 140-320 degrees C). The doping of Co further improves the low-temperature NH3-SCR of the catalyst. When n(Co):n(Ti) = 0.05, the catalyst has the best catalytic performance with the NO conversion reaches 100% at 100 degrees C. CONCLUSION Temperature-programmed reduction (H-2-TPR) and temperature-programmed desorption (NH3-TPD) results showed that Ti-C,N can improve the redox ability but reduces the surface acidity. Co-doping has no effect on surface acidity, but the redox ability is further improved. A suitable amount of Co-doping is beneficial to the optimal catalytic activity of Mn-Ce-Co-0.05/Ti-C,N catalyst. This suggests a balance between redox properties and surface acidity. Especially for the strong redox ability, it can promote the oxidation of NO to NO2, and promote low-temperature NH3-SCR through the 'fast SCR' pathway. X-ray photoelectron spectroscopy results of the highest chemisorbed oxygen (O-alpha) concentration and relative atomic ratio (Mn4+/Mnn+, Ce3+/Cen+ and Co3+/Con+) confirmed the above conclusion. Both the Langmuir-Hinshelwood (L-H) and Eley-Rideal (E-R) mechanisms occurred in the NH3-SCR reaction over the Mn-Ce-Co-0.05/Ti-C,N catalyst. (c) 2021 Society of Chemical Industry

Activation of Fast Selective Catalytic Reduction of NO by NH3 at Low Temperature over TiO2 Modified CuOX-CeOX Composites

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

DRIFT Study of CuO–CeO2–TiO2 Mixed Oxides for NOx Reduction with NH3 at Low Temperatures

DRIFT Study of CuO-CeO₂-TiO₂ Mixed Oxides for NOx Reduction with NH₃ at Low Temperatures.

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

Catalytic Reduction of NO by NH3 over Fe–Cu–OX/CNTs-TiO2 Composites at Low Temperature

A Ce–Cu–Ti oxide catalyst for the selective catalytic reduction of NO with NH3

Enhancement of Low-Temperature Catalytic Activity over a Highly Dispersed Fe–Mn/Ti Catalyst for Selective Catalytic Reduction of NOx with NH3

A mechanistic investigation of the selective catalytic reduction of NOx with NH3 over supported CeO2/TiO2 catalysts

Selective catalytic reduction of NO with NH3 over CuOX-carbonaceous materials

Ultra-low loading of copper modified TiO2/CeO2 catalysts for low-temperature selective catalytic reduction of NO by NH3

Study on the surface properties of TiO2-SnO2 supported catalysts for low temperature selective catalytic reduction of NOx

Facile Preparation of High-Performance Fe-doped Ce–Mn/TiO2 Catalysts for the Low-Temperature Selective Catalytic Reduction of NOx with NH3

Preparation and characterization of CeO2/TiO2 catalysts for selective catalytic reduction of NO with NH3

Thulium Modified MnOx/TiO2 Catalyst for the Low-Temperature Selective Catalytic Reduction of NO with Ammonia

CuOx and WOx modified CeO2-TiO2 with various morphologies for the selective catalytic reduction of NOx with NH3

Performance of a Novel CuSO4-CeO2/TiO2-SiO2 Catalyst for NO Reduction with NH3 at Low Temperature

Novel CeO2@TiO2 core-shell nanostructure catalyst for selective catalytic reduction of NOx with NH3.

Comparison Study of Cu-Fe-Ti and Co-Fe-Ti Oxide Catalysts for Selective Catalytic Reduction of NO with NH3 at Low Temperature

The Superior Performance of Nb-modified Cu-Ce-Ti Mixed Oxides for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH3.