Abstract:The emission of NOx can causes serious environmental pollution and endangers human health. In recent years, the selective catalytic reduction of NO with NH3 (NH3‐SCR) technology has been widely studied and adopted to reduce the production and emissions of NOx during many technologies. A series of Mn–Ce–Cox/Ti–C,N catalysts were prepared by the impregnation method, and low‐temperature NH3–SCR was studied. The results show that support modification (Ti–C,N) can broaden the operation temperature window of the catalyst (NO conversion >95%: Mn–Ce/TiO2 catalyst, 160–320 °C; Mn–Ce/Ti–C,N catalyst, 140–320 °C). The doping of Co further improves the low‐temperature NH3‐SCR of the catalyst. When n(Co):n(Ti) = 0.05, the catalyst has the best catalytic performance with the NO conversion reaches 100% at 100 °C. Temperature‐programmed reduction (H2‐TPR) and temperature‐programmed desorption (NH3‐TPD) results showed that Ti–C,N can improve the redox ability but reduces the surface acidity. Co‐doping has no effect on surface acidity, but the redox ability is further improved. A suitable amount of Co‐doping is beneficial to the optimal catalytic activity of Mn–Ce–Co0.05/Ti–C,N catalyst. This suggests a balance between redox properties and surface acidity. Especially for the strong redox ability, it can promote the oxidation of NO to NO2, and promote low‐temperature NH3‐SCR through the ‘fast SCR’ pathway. X‐ray photoelectron spectroscopy results of the highest chemisorbed oxygen (Oα) concentration and relative atomic ratio (Mn4+/Mnn+, Ce3+/Cen+ and Co3+/Con+) confirmed the above conclusion. Both the Langmuir–Hinshelwood (L‐H) and Eley–Rideal (E‐R) mechanisms occurred in the NH3‐SCR reaction over the Mn–Ce–Co0.05/Ti–C,N catalyst. © 2021 Society of Chemical Industry

Selective catalytic reduction of NO<sub>x</sub> with NH<sub>3</sub> over a novel Co-Ce-Ti catalyst

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Novel Mn-Ce-Ti Mixed-Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH₃.

The selective catalytic reduction of NO over Ce0.3TiOx-supported metal oxide catalysts

Activation of Fast Selective Catalytic Reduction of NO by NH3 at Low Temperature over TiO2 Modified CuOX-CeOX Composites

Superior Ce–Nb–Ti oxide catalysts for selective catalytic reduction of NO with NH3

A Ce–Cu–Ti oxide catalyst for the selective catalytic reduction of NO with NH3

A superior CeO2 @TiO2 catalyst with high dispersion of CeO2 for selective catalytic reduction of NOx with NH3

The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH3.

Preparation and characterization of CeO2/TiO2 catalysts for selective catalytic reduction of NO with NH3

Activity and Characterization of Ce–Mo–Ti Mixed Oxide Catalysts Prepared by a Homogeneous Precipitation Method for Selective Catalytic Reduction of NO with NH3

A mechanistic investigation of the selective catalytic reduction of NOx with NH3 over supported CeO2/TiO2 catalysts

The Superior Performance of Nb-modified Cu-Ce-Ti Mixed Oxides for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

TiO2-modified CeVO4 catalyst for the selective catalytic reduction of NOx with NH3

Nb-modified Mn/Ce/Ti Catalyst for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

C,N ‐modified TiO 2 ‐supported Mn–Ce–Co x ‐based catalyst for low‐temperature NH 3 ‐SCR

Investigation of Co–Mn–Ce Ternary Composite Oxide Catalyst for Low-Temperature Selective Catalytic Reduction of NOx with NH3

A novel Ce–Ta mixed oxide catalyst for the selective catalytic reduction of NO x with NH 3

CuOx and WOx modified CeO2-TiO2 with various morphologies for the selective catalytic reduction of NOx with NH3