Abstract:A series of Ti-Nb binary oxide were synthesized by co-precipitation as supports to prepare Cu/Ti-Nb mixed oxide catalysts through wetness impregnation. The novel catalyst 0.8%Cu/Ti2NbOx exhibited an excellent catalytic activity and N-2 selectivity with a broad operation temperature (250-425 degrees C) under a gas hourly space velocity (GHSV) of 177,000 h(-1) for the selective catalytic reduction of NOx with NH3. A series of analytical techniques including high resolution transmission electron microscopy (HRTEM), N-2-physisorption, X-ray diffraction (XRD), Laser Raman spectra (LRS), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), NH3 temperature-programmed desorption (NH3-TPD), H-2 temperature-programmed reduction (H-2-TPR) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to investigate the correlations among catalyst structure, surface properties and catalytic performance. For the support Ti2NbOx, the specific surface area was larger than that of TiO2, promoting the high dispersion of the active component. Also, the surface acid sites were increased by addition of niobium oxide species and the redox capability of the support was enhanced by doping copper species. Moreover, the introduction of copper species effectively enhanced the catalytic performance within 225-400 degrees C. The copper species mainly existed as isolated Cu2+ and non-isolated Cu2+ and the isolated Cue(2+) ions played a significant role in the high NH3-SCR performance over 0.8%Cu/Ti2NbOx catalyst. Hydrothermal aging treatment experiment demonstrated that 0.8%Cu/Ti2NbOx catalyst had an excellent hydrothermal stability. In addition, water vapor or/and SO2 had a slightly reversible inhibition influence on the catalytic performance over 0.8%Cu/Ti2NbOx, indicating that it was a promising candidate for NH3-SCR catalyst in the future practical application. The reaction pathway over 0.8%Cu/Ti2NbOx catalyst followed both Eley-Rideal mechanism and Langmuir-Hinshelwood mechanism at 225 degrees C. (C) 2017 Elsevier B.V. All rights reserved.

Nb-modified Mn/Ce/Ti Catalyst for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

The Superior Performance of Nb-modified Cu-Ce-Ti Mixed Oxides for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

Manganese–niobium Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Modification of MnCo₂Oₓ Catalysts by NbOₓ for Low Temperature Selective Catalytic Reduction of NO with NH₃

Superior Ce–Nb–Ti oxide catalysts for selective catalytic reduction of NO with NH3

C,N ‐modified TiO 2 ‐supported Mn–Ce–Co x ‐based catalyst for low‐temperature NH 3 ‐SCR

Ceria modified MnOx/TiO2 as a superior catalyst for NO reduction with NH3 at low-temperature

Si-modified Mn-Ce oxide catalyst for selective catalytic reduction of NOx with NH3 at low temperature

Promotional role of Nb modification on CuCeOx catalyst for low temperature selective catalytic reduction of NO with NH3: A mechanism investigation

Novel Mn-Ce-Ti Mixed-Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH₃.

Modification of MnCo<sub>2</sub>O<sub>x</sub> catalysts by NbO<sub>x</sub> for low temperature selective catalytic reduction of NO with NH<sub>3</sub>

Low-temperature selective catalytic reduction of NO with NH3 over Mn–Ce–Ox/TiO2: a comparison between catalyst preparation methods

Ti or Sn Doping As a Way to Increase Activity and Sulfur Tolerance of Mn/CeO2 Catalyst for Low Temperature NH3 Selective Catalytic Reduction of NO

Effect of Metal Ions Doping (M = Ti4+, Sn4+) on the Catalytic Performance of MnOx/CeO2 Catalyst for Low Temperature Selective Catalytic Reduction of NO with NH3

Improved NH3-SCR Denox Activity and Tolerance to H2O & SO2 at Low Temperature over the NbmCu0.1-mCe0.9Ox Catalysts: Role of Acidity by Niobium Doping

Low-temperature Selective Catalytic Reduction of NO with NH3 over MnCe Oxides Supported on TiO2 and Al2O3: A Comparative Study

Promotional Synergistic Effect of Cu and Nb Doping on a Novel Cu/Ti-Nb Ternary Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

Selective Catalytic Reduction of NOx with NH3 over Mn, Ce Substitution Ti0.9V0.1O2−δ Nanocomposites Catalysts Prepared by Self-Propagating High-Temperature Synthesis Method