Abstract:The emission of NOx can causes serious environmental pollution and endangers human health. In recent years, the selective catalytic reduction of NO with NH3 (NH3‐SCR) technology has been widely studied and adopted to reduce the production and emissions of NOx during many technologies. A series of Mn–Ce–Cox/Ti–C,N catalysts were prepared by the impregnation method, and low‐temperature NH3–SCR was studied. The results show that support modification (Ti–C,N) can broaden the operation temperature window of the catalyst (NO conversion >95%: Mn–Ce/TiO2 catalyst, 160–320 °C; Mn–Ce/Ti–C,N catalyst, 140–320 °C). The doping of Co further improves the low‐temperature NH3‐SCR of the catalyst. When n(Co):n(Ti) = 0.05, the catalyst has the best catalytic performance with the NO conversion reaches 100% at 100 °C. Temperature‐programmed reduction (H2‐TPR) and temperature‐programmed desorption (NH3‐TPD) results showed that Ti–C,N can improve the redox ability but reduces the surface acidity. Co‐doping has no effect on surface acidity, but the redox ability is further improved. A suitable amount of Co‐doping is beneficial to the optimal catalytic activity of Mn–Ce–Co0.05/Ti–C,N catalyst. This suggests a balance between redox properties and surface acidity. Especially for the strong redox ability, it can promote the oxidation of NO to NO2, and promote low‐temperature NH3‐SCR through the ‘fast SCR’ pathway. X‐ray photoelectron spectroscopy results of the highest chemisorbed oxygen (Oα) concentration and relative atomic ratio (Mn4+/Mnn+, Ce3+/Cen+ and Co3+/Con+) confirmed the above conclusion. Both the Langmuir–Hinshelwood (L‐H) and Eley–Rideal (E‐R) mechanisms occurred in the NH3‐SCR reaction over the Mn–Ce–Co0.05/Ti–C,N catalyst. © 2021 Society of Chemical Industry

Ceria modified MnOx/TiO2 as a superior catalyst for NO reduction with NH3 at low-temperature

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Nb-modified Mn/Ce/Ti Catalyst for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

C,N ‐modified TiO 2 ‐supported Mn–Ce–Co x ‐based catalyst for low‐temperature NH 3 ‐SCR

CeO2 Nanoparticle-Loaded MnO2 Nanoflowers for Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Catalytic performance of CeO2-NPs and α-MnO2 mixed oxides catalysts for low-temperature NH3-SCR of NO

Si-modified Mn-Ce oxide catalyst for selective catalytic reduction of NOx with NH3 at low temperature

The role of cerium in the improved SO2 tolerance for NO reduction with NH3 over Mn-Ce/TiO2 catalyst at low temperature

Low-temperature scr of no with nh3 on Mn-based catalysts modified with cerium

Low-temperature Selective Catalytic Reduction of NO with NH3 over MnCe Oxides Supported on TiO2 and Al2O3: A Comparative Study

CeO 2 Catalysts for NH 3 ‐ SCR at Low Temperatures

MnOx–CeO2/Activated Carbon Honeycomb Catalyst for Selective Catalytic Reduction of NO with NH3 at Low Temperatures

Superior Ce–Nb–Ti oxide catalysts for selective catalytic reduction of NO with NH3

DRIFT Study of CuO–CeO2–TiO2 Mixed Oxides for NOx Reduction with NH3 at Low Temperatures

Effect of ceria doping on SO2 resistance of Mn/TiO2 for selective catalytic reduction of NO with NH3 at low temperature

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

The Superior Performance of Nb-modified Cu-Ce-Ti Mixed Oxides for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH3.