Abstract:A series of Ti-Nb binary oxide were synthesized by co-precipitation as supports to prepare Cu/Ti-Nb mixed oxide catalysts through wetness impregnation. The novel catalyst 0.8%Cu/Ti2NbOx exhibited an excellent catalytic activity and N-2 selectivity with a broad operation temperature (250-425 degrees C) under a gas hourly space velocity (GHSV) of 177,000 h(-1) for the selective catalytic reduction of NOx with NH3. A series of analytical techniques including high resolution transmission electron microscopy (HRTEM), N-2-physisorption, X-ray diffraction (XRD), Laser Raman spectra (LRS), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), NH3 temperature-programmed desorption (NH3-TPD), H-2 temperature-programmed reduction (H-2-TPR) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to investigate the correlations among catalyst structure, surface properties and catalytic performance. For the support Ti2NbOx, the specific surface area was larger than that of TiO2, promoting the high dispersion of the active component. Also, the surface acid sites were increased by addition of niobium oxide species and the redox capability of the support was enhanced by doping copper species. Moreover, the introduction of copper species effectively enhanced the catalytic performance within 225-400 degrees C. The copper species mainly existed as isolated Cu2+ and non-isolated Cu2+ and the isolated Cue(2+) ions played a significant role in the high NH3-SCR performance over 0.8%Cu/Ti2NbOx catalyst. Hydrothermal aging treatment experiment demonstrated that 0.8%Cu/Ti2NbOx catalyst had an excellent hydrothermal stability. In addition, water vapor or/and SO2 had a slightly reversible inhibition influence on the catalytic performance over 0.8%Cu/Ti2NbOx, indicating that it was a promising candidate for NH3-SCR catalyst in the future practical application. The reaction pathway over 0.8%Cu/Ti2NbOx catalyst followed both Eley-Rideal mechanism and Langmuir-Hinshelwood mechanism at 225 degrees C. (C) 2017 Elsevier B.V. All rights reserved.

The Superior Performance of Nb-modified Cu-Ce-Ti Mixed Oxides for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Nb-modified Mn/Ce/Ti Catalyst for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

Promotional role of Nb modification on CuCeOx catalyst for low temperature selective catalytic reduction of NO with NH3: A mechanism investigation

Superior Ce–Nb–Ti oxide catalysts for selective catalytic reduction of NO with NH3

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Improved NH3-SCR Denox Activity and Tolerance to H2O & SO2 at Low Temperature over the NbmCu0.1-mCe0.9Ox Catalysts: Role of Acidity by Niobium Doping

Promotional Synergistic Effect of Cu and Nb Doping on a Novel Cu/Ti-Nb Ternary Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

Activation of Fast Selective Catalytic Reduction of NO by NH3 at Low Temperature over TiO2 Modified CuOX-CeOX Composites

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

CuOx and WOx modified CeO2-TiO2 with various morphologies for the selective catalytic reduction of NOx with NH3

A Comprehensive Study on Sulfur Tolerance of Niobia Modified CeO2/WO3-TiO2 Catalyst for Low-Temperature NH3-SCR

Effect of Preferential Exposure of Anatase TiO2 {0 0 1} Facets on the Performance of Mn-Ce/TiO2 Catalysts for Low-Temperature Selective Catalytic Reduction of NOx with NH3

Manganese–niobium Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Modification of MnCo₂Oₓ Catalysts by NbOₓ for Low Temperature Selective Catalytic Reduction of NO with NH₃

DRIFT Study of CuO–CeO2–TiO2 Mixed Oxides for NOx Reduction with NH3 at Low Temperatures

Ceria modified MnOx/TiO2 as a superior catalyst for NO reduction with NH3 at low-temperature

Comparative study of Ce-Nb-Ti oxide catalysts prepared by different methods for selective catalytic reduction of NO with NH3

DRIFT Study of CuO-CeO₂-TiO₂ Mixed Oxides for NOx Reduction with NH₃ at Low Temperatures.

C,N ‐modified TiO 2 ‐supported Mn–Ce–Co x ‐based catalyst for low‐temperature NH 3 ‐SCR