Abstract:Iron oxides supported on TiO2 catalysts show good activity in selective catalytic reduction (SCR) of NOx by ammonia. In this work, Fe-2(SO4)(3)/TiO2 and other catalysts containing iron and sulfates were prepared by the impregnation method and their activities for SCR of NOx by ammonia were investigated On Fe-2(SO4)(3)/TiO2 catalyst, NOx conversion reached 98.0% in the temperature range of 350-450 degrees C, while yielding little N2O. Characterization results showed that alpha-Fe2O3 and sulfates were mainly formed on the Fe-2(SO4)(3)/TiO2 catalyst. Iron oxide catalysts with sulfates [e.g., Fe-2(SO4)(3)/TiO2] caused more dispersed iron phase, and the sulfation effect might have mostly occurred on iron oxides but not TiO2. In contrast, Fe(NO3)(3) precursor supported on TiO2 without sulfates led to the Fe2O3 particle products, which physically connected to the surface of TiO2 and resulted in some agglomerations or heterogeneous distribution of Fe2O3 particles. In addition, sulfates played an important role in the SCR reactions, which were responsible for strong Bronsted acid sites. The SCR reaction mechanism on Fe-2(SO4)(3)/TiO2 might have taken place as follows: NH3 was adsorbed onto the surface of Fe-2(SO4)(3)/TiO2 and mainly formed NH4+ on Bronsted acid sites. NO was oxidized to NO2 by the oxygen in the reaction gas or on the iron oxide sites of the catalyst. Then, nitrates originated from NO2 were generated on Fe-2(SO4)(3)/TiO2 catalyst for NH3-SCR reaction. Finally, an active intermediate species like ammonium nitrite was formed, which eventually decomposed to gaseous nitrogen.

Insights over Titanium Modified FeMgOx Catalysts for Selective Catalytic Reduction of NOx with NH3: Influence of Precursors and Crystalline Structures

New Insights into the Relationships Between Performance and Physicochemical Properties of FeOx–NbOx Mixed Oxide Catalysts for the NH3-SCR Reactions

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Enhancement of Low-Temperature Catalytic Activity over a Highly Dispersed Fe–Mn/Ti Catalyst for Selective Catalytic Reduction of NOx with NH3

Microwave‐Pyrolysis‐Assisted Preparation of Magnetic Iron‐Titanium Mixed Oxide Catalyst for Selective Catalytic Reduction of NOx with NH3

Insights into the Highly Efficient Co Modified MnSm/Ti Catalyst for Selective Catalytic Reduction of NOx with NH3 at Low Temperature

Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Fe–Mn Mixed-Oxide Catalysts Containing Fe3Mn3O8 Phase

Preparation of Cr-Mn Mixed Oxide by Coprecipitation and Its Performance for Low-Temperature Selective Catalytic Reduction of NOx

Selective Catalytic Reduction of NOx with NH3 over Fe Modified MOF-Derived MnOx Catalyst

Insight into highly efficient FeOx catalysts for the selective catalytic reduction of NOx by NH3: Experimental and DFT study

Fe–Mn Mixed Oxide Catalysts Synthesized by One-Step Urea-Precipitation Method for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Removal of NOx using novel Fe-Mn-Ti compound catalysts at low temperature

Transition metals (Co, Zr, Ti) modified iron-samarium oxide as efficient catalysts for selective catalytic reduction of NOx at low-temperature

Promoting Effect of Ti Species in MnOx-FeOx/Silicalite-1 for the Low-Temperature NH3-SCR Reaction

Molybdenum-containing oxide catalysts for selective catalytic reduction of NOx with NH3

Catalytic Performance, Characterization, and Mechanism Study of Fe-2(So4)(3)/Tio2 Catalyst for Selective Catalytic Reduction of Nox by Ammonia

Promotional effect of iron oxide on the catalytic properties of Fe–MnOx/TiO2 (anatase) catalysts for the SCR reaction at low temperatures

Influence of support precursor on FeCe-TiO<sub>2</sub> for selective catalytic reduction of NO with ammonia

Effect of Preferential Exposure of Anatase TiO2 {0 0 1} Facets on the Performance of Mn-Ce/TiO2 Catalysts for Low-Temperature Selective Catalytic Reduction of NOx with NH3

Iron Oxide-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOxwith NH3