Abstract:A highly efficient catalyst of a CoaMnbOx mixed oxide prepared by the co-precipitation method was developed for the selective catalytic reduction (SCR) of NOx with ammonia. With an increase in the Mn content, the catalytic activity of the CoaMnbOx mixed oxide exhibited a volcano-type tendency, and when Co/Mn molar ratio reached 7:3 (Co7Mn3Ox), the operation temperature for achieving > 80% NOx conversion was 170 degrees C (116-285 degrees C window). The formation of spinel structured MnCo2O4 is highly important, and the presence of the spinel structure in Co7Mn3Ox contributes to the increase in active sites and thermal stability and promotes SO2 and/or H2O resistance. In comparison with MnOx or CoOx alone, the CoaMnbOx catalysts possess improved redox properties and more surface acid sites due to synergistic effects between the Co and Mn species. Among the CoaMnbOx catalysts with different Co/Mn molar ratios, a higher NH3 and NO + O-2 adsorption ability was found for the Co7Mn3Ox catalyst, originating from its MnCo2O4.5 phase and higher surface area, which leads to the higher activity of the Co7Mn3Ox, catalyst. In situ DRIFTs indicated that bridging nitrate and bidentate nitrate are the intermediate species in the NH3-SCR reaction, and the high NO adsorption ability and improved redox properties of the Co7Mn3Ox catalyst are beneficial for the formation of nitrate species on the catalyst surface. Furthermore, NH3 species adsorbed at Lewis acid sites taken part in SCR reaction, while the reactivity of NH3 species adsorbed at Bronsted acid was not definitized.

Selective catalytic reduction of NOx with NH3 over Mn–Zr–Ti mixed oxide catalysts

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Novel Mn–Zr Mixed Oxide Catalysts

Preparation and catalytic performance of MnO/TiO2-ZrO2 catalysts used for the selective catalytic reduction of NO at low temperature

Selective Catalytic Reduction of NOx by NH3 over Mn-Promoted V2O5/TiO2 Catalyst

Low-temperature selective catalytic reduction of NO with NH3 over MnOx-CeO2/ZrO2-TiO2 monolith catalyst

Low-temperature Selective Catalytic Reduction of NO with NH3 over Monolith Catalyst of MnOx/CeO2–ZrO2–Al2O3

Low-Temperature Selective Catalytic Reduction of NO with NH_3 over MnO_x-CeO_2/ZrO_2-TiO_2 Monolith Catalyst

Molybdenum-containing oxide catalysts for selective catalytic reduction of NOx with NH3

Selective catalytic reduction of NOx with NH3 over MoO3/Mn-Zr composite oxide catalyst

Cr–MnO Mixed-Oxide Catalysts for Selective Catalytic Reduction of NO with NH3 at Low Temperature

Improved N2 Selectivity of MnOx Catalysts for NOx Reduction by Engineering Bridged Mn3+ Sites

MnOx-Decorated Fe–Zr-Based Nano-Catalysts for Low-Temperature NH3-SCR: Improvement of Catalytic Activity

Selective Catalytic Reduction of Nox with Nh3 on A Cr-Mn Mixed Oxide at Low Temperature

The activity and characterization of MnOx–CeO2–ZrO2/γ-Al2O3 catalysts for low temperature selective catalytic reduction of NO with NH3

Insights on the Mechanism of Enhanced Selective Catalytic Reduction of NO with NH3 over Zr-doped MnCr2O4: A Combination of in Situ DRIFTS and DFT

Novel Mn-Ce-Ti Mixed-Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH₃.

Manganese Oxide Catalysts Supported on Zinc Oxide Nanorod Arrays: A New Composite for Selective Catalytic Reduction of NOx with NH3 at Low Temperature

Spinel Structured CoaMnbOx Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

The Role of NH_3 in the Low-Temperature Selective Catalytic Reduction of NO over MnO_x/TiO_2

Selective catalytic reduction of NOx with NH3 over V2O5-WO3/TiO2-ZrO2 monolith catalysts