Abstract:A series of Ti-Nb binary oxide were synthesized by co-precipitation as supports to prepare Cu/Ti-Nb mixed oxide catalysts through wetness impregnation. The novel catalyst 0.8%Cu/Ti2NbOx exhibited an excellent catalytic activity and N-2 selectivity with a broad operation temperature (250-425 degrees C) under a gas hourly space velocity (GHSV) of 177,000 h(-1) for the selective catalytic reduction of NOx with NH3. A series of analytical techniques including high resolution transmission electron microscopy (HRTEM), N-2-physisorption, X-ray diffraction (XRD), Laser Raman spectra (LRS), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), NH3 temperature-programmed desorption (NH3-TPD), H-2 temperature-programmed reduction (H-2-TPR) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to investigate the correlations among catalyst structure, surface properties and catalytic performance. For the support Ti2NbOx, the specific surface area was larger than that of TiO2, promoting the high dispersion of the active component. Also, the surface acid sites were increased by addition of niobium oxide species and the redox capability of the support was enhanced by doping copper species. Moreover, the introduction of copper species effectively enhanced the catalytic performance within 225-400 degrees C. The copper species mainly existed as isolated Cu2+ and non-isolated Cu2+ and the isolated Cue(2+) ions played a significant role in the high NH3-SCR performance over 0.8%Cu/Ti2NbOx catalyst. Hydrothermal aging treatment experiment demonstrated that 0.8%Cu/Ti2NbOx catalyst had an excellent hydrothermal stability. In addition, water vapor or/and SO2 had a slightly reversible inhibition influence on the catalytic performance over 0.8%Cu/Ti2NbOx, indicating that it was a promising candidate for NH3-SCR catalyst in the future practical application. The reaction pathway over 0.8%Cu/Ti2NbOx catalyst followed both Eley-Rideal mechanism and Langmuir-Hinshelwood mechanism at 225 degrees C. (C) 2017 Elsevier B.V. All rights reserved.

Low temperature SCR denitration with NH3 by highly dispersed Ni–Cu Sites: An insight into surface acidity and redox ability

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Ni-Mn Bi-Metal Oxide Catalysts for the Low Temperature SCR Removal of NO with NH3

Tunable Highly Dispersed Nia-xMnxAlOy Catalysts Derived from Layered Double Oxide for Low Temperature NOx Removal

Synthesis of polymetallic oxides hollow spheres with superior activity, resistance to SO2, H2O and metal poisons for low-temperature NH3‐selective catalytic reduction of NOx

Selective catalytic reduction of NO by NH 3 over fresh and sulfated CuO/γ-A1 2O3 catalysts

Fe-Mn/Al2O3 Catalysts for Low Temperature Selective Catalytic Reduction of NO with NH3

Boosting Low-Temperature NH3-SCR Performance Via Mixed-Valence Cobalt Dual Active Sites

High-performance Fe-Cu composite oxide for selective catalytic reduction of NO with NH3: Driving of Cu on α-Fe2O3

The Promotion Effect of Niobium on the Low-Temperature Activity of Al-rich Cu-SSZ-13 for Selective Catalytic Reduction of NOx with NH3

Surface Tailoring on Bifunctional CuOx/MnO2 Catalyst to Promote the Selective Catalytic Reduction of NO with NH3 and Oxidation of CO with O2

Selective Catalytic Reduction of NO by NH3 Over Fresh and Sulfated CuO/gamma-Al2O3 Catalysts

Synthesis of Cu0.5Mg1.5Mn0.5Al0.5Ox Mixed Oxide from Layered Double Hydroxide Precursor As Highly Efficient Catalyst for Low-Temperature Selective Catalytic Reduction of NOx with NH3

Fe–Mn Mixed Oxide Catalysts Synthesized by One-Step Urea-Precipitation Method for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Direct Synthesis of Submicron Cu-SAPO-34 As Highly Efficient and Robust Catalyst for Selective Catalytic Reduction of NO by NH3

The Superior Performance of Nb-modified Cu-Ce-Ti Mixed Oxides for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

Promotional Synergistic Effect of Cu and Nb Doping on a Novel Cu/Ti-Nb Ternary Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

Insights into the Highly Efficient Co Modified MnSm/Ti Catalyst for Selective Catalytic Reduction of NOx with NH3 at Low Temperature

Selective catalytic reduction of NO with NH 3 over sol-gel-derived CuO-CeO 2 -MnO x / γ -Al 2 O 3 catalysts

Selective Catalytic Reduction of NO by NH3 over CuO/γ-Al2O3 Catalysts

Preparation of metal-organic framework Cu<SUP>+</SUP>/Ni-MOF catalyst with enhanced catalytic activity for selective catalytic reduction of NOx